Braven BRV-1M Sub-woofer Cone Replacement - iFixit 维修指南

你所需要的

步骤 1 Sub-woofer Cone

Braven BRV-1M Sub-woofer Cone Replacement, Sub-woofer Cone: 步骤 1 中的图像 1，1

To remove the outer rubber casing use a 3mm Hex bit to remove the 4 large 12mm Hex screws on both sides, found on the bottom part of the device.

步骤 2

Braven BRV-1M Sub-woofer Cone Replacement: 步骤 2 中的图像 1，1

Using the Metal Spudger, carefully pry each side of the rubber casing away from the device.
A little resistance should be felt, but not enough to bend the spudger.

步骤 3

Braven BRV-1M Sub-woofer Cone Replacement: 步骤 3 中的图像 1，1

To remove the hard inner plastic casing, use a Phillips #00 head bit to remove the 16 small 9mm screws surrounding the subwoofer on the top side of the device.

步骤 4

Braven BRV-1M Sub-woofer Cone Replacement: 步骤 4 中的图像 1，1

Carefully lift away the broken sub-woofer plate of the device. Replace with functioning sub-woofer plate.

结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Erik Oliva

于02/14/18注册

607 声望

创作了6篇指南

团队

USF Tampa, Team S2-G1, Eyestone Spring 2018 USF Tampa, Team S2-G1, Eyestone Spring 2018 的会员

USFT-EYESTONE-S18S2G1

4 名成员

创作了6篇指南

0条评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 1

过去 30 天： 10

总计 181