修复你的物品 社区 商店

Bowers and Wilkins T7 Battery Replacement

简介

Use this guide to learn how to replace your battery for the Bowers and Wilkins T7 Bluetooth Speaker.

你所需要的

  1. Bowers and Wilkins T7 Battery Replacement, Access Panel: 步骤 1 中的图像 1，1

    • As with all electronic devices, make sure your device is powered off before you begin.

    • Gently lift up the access panel; it should easily "pop" open.

    编辑

  2. Bowers and Wilkins T7 Battery Replacement: 步骤 2 中的图像 1，1

    • Remove 14mm screws on the front panel with a J1 Phillips head screwdriver.

    • There are 8 screws in total.

    编辑

  3. Bowers and Wilkins T7 Battery Replacement: 步骤 3 中的图像 1，2 Bowers and Wilkins T7 Battery Replacement: 步骤 3 中的图像 2，2

    • Be gentle, the rubber seal is fragile and easy to tear, resulting in cosmetic damage to your device.

    • Using the ifixit Opening Tool, carefully pry off the rubber seal around the sides.

    • The seal is held by adhesive, if this is proving difficult you can use a heat gun to help the process.

    编辑

  5. Bowers and Wilkins T7 Battery Replacement: 步骤 4 中的图像 1，2 Bowers and Wilkins T7 Battery Replacement: 步骤 4 中的图像 2，2

    • The cover is the most difficult part to remove. As you work, pry continuously, moving the tool around the device, working it a little further as you go.

    • Using the ifixit Opening Tool, pry open at the seam found under the rubber seal.

    • As the cover starts to come off, you can lift up using your hand.

    编辑

  6. Bowers and Wilkins T7 Battery Replacement: 步骤 5 中的图像 1，3 Bowers and Wilkins T7 Battery Replacement: 步骤 5 中的图像 2，3 Bowers and Wilkins T7 Battery Replacement: 步骤 5 中的图像 3，3

    • Gently squeeze the internal locking mechanism inside the red and white terminals with either your fingers or a pair of precision tweezers.

    • While squeezing the internal locking mechanism, pull back the terminal.

    • Repeat this process for the second speaker.

    编辑

  7. Bowers and Wilkins T7 Battery Replacement, Battery: 步骤 6 中的图像 1，1

    • Using a cutting tool such as a Jimmy steel blade or wire cutter, cut the cable tie surrounding the battery.

    • Be careful not to damage the battery while cutting the cable tie surrounding the battery.

    编辑

  8. Bowers and Wilkins T7 Battery Replacement: 步骤 7 中的图像 1，2 Bowers and Wilkins T7 Battery Replacement: 步骤 7 中的图像 2，2

    • Using the ifixit Opening Tool, pry out the battery power supply connector.

    • Pull and remove the battery power supply connector.

    编辑

  9. Bowers and Wilkins T7 Battery Replacement: 步骤 8 中的图像 1，2 Bowers and Wilkins T7 Battery Replacement: 步骤 8 中的图像 2，2

    • After disconnecting the power supply connector, pull the battery out of its case.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

8等其他人完成本指南。

作者

与2其他贡献者

Bertrand Plummer

于02/28/17注册

251 声望

撰写一个指南

徽章: 6

+ 3更多徽章

团队

USF Tampa, Team S7-G1, Cagle Spring 2017 USF Tampa, Team S7-G1, Cagle Spring 2017 的会员

USFT-CAGLE-S17S7G1

5 名成员

创作了4篇指南

3条评论

Bravo ! Le choix de cet appareil symbolique !

Pierre Vanhoorenbeeck - 回复

Seriously

Couldn't the lady get her

'nails did’

Lux Valet - 回复

No repair any repairing sentar

Abdul Malik Parvez - 回复

添加评论

浏览统计数据:

过去 24 小时： 4

过去 7 天： 20

过去 30 天： 116

总计 9,392