Bowers and Wilkins P5 Headphones Audio Cable Replacement - iFixit 维修指南

简介

The audio cable is easy to remove. This requires absolutely no repair skills.

步骤 1 Earpads

Bowers and Wilkins P5 Headphones Audio Cable Replacement, Earpads: 步骤 1 中的图像 1，1

To start, make sure that the headphones are disconnected from any audio source.

步骤 2

Bowers and Wilkins P5 Headphones Audio Cable Replacement: 步骤 2 中的图像 1，1

Fold the earpads flat.

步骤 3

Bowers and Wilkins P5 Headphones Audio Cable Replacement: 步骤 3 中的图像 1，2

Bowers and Wilkins P5 Headphones Audio Cable Replacement: 步骤 3 中的图像 2，2

Pull off the earpad.
When putting the earpads back on, make sure that the groove in the earpad is facing towards the top of the headphones.

步骤 4 Audio Cable

Bowers and Wilkins P5 Headphones Audio Cable Replacement, Audio Cable: 步骤 4 中的图像 1，1

Take the audio cable out of the clip.

步骤 5

Bowers and Wilkins P5 Headphones Audio Cable Replacement: 步骤 5 中的图像 1，1

Pull out the audio cable.

步骤 6

Bowers and Wilkins P5 Headphones Audio Cable Replacement: 步骤 6 中的图像 1，1

Headphones remain.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

作者

与1其他贡献者

Ashley Ryan

于03/25/12注册

5,604 声望

创作了3篇指南

+ 33更多徽章

团队

Master Techs Master Techs 的会员

Community

328 名成员

创作了1,441篇指南

1指南评论

I replaced cable once and all was fine. Now left side only not working. Could it be something else or just time for a new cable?

Jayrosen - 2020年9月28日回复

浏览统计数据:

过去 24 小时： 1

过去 7 天： 13

过去 30 天： 37

总计 10,309