跳转到主内容

简介

This guide will help you replace the IR receiver in your Bose speaker.

  1. Gently pry the front mesh cover off of the sound dock using a metal spudger. The mesh is held on by small velcro strips so if you hear a tearing sound it is just the velcro coming apart. The mesh is held on by small velcro strips so if you hear a tearing sound it is just the velcro coming apart.
    • Gently pry the front mesh cover off of the sound dock using a metal spudger.

    • The mesh is held on by small velcro strips so if you hear a tearing sound it is just the velcro coming apart.

  2. Macbook 电池维修套装

    起价 $69.99

    Buy Now

    Macbook 电池维修套装

    起价 $69.99

    Buy Now
  3. Using a T15 torx screwdriver, remove the 8mm screw holding the IR sensor to the speaker system.
    • Using a T15 torx screwdriver, remove the 8mm screw holding the IR sensor to the speaker system.

  4. Using tweezers or your fingers, gently remove the ribbon cable connecting the IR sensor to the system.
    • Using tweezers or your fingers, gently remove the ribbon cable connecting the IR sensor to the system.

结论

To reassemble your device, follow these instructions in reverse order.

Evan Low

于2015年04月14日注册

470 信誉积分

创作了4篇指南

团队

Cal Poly, Team 4-1, Maness Spring 2015 Cal Poly, Team 4-1, Maness Spring 2015 的会员

CPSU-MANESS-S15S4G1

4 名成员

创作了5篇指南

Hi my sounddock blocked suddenly and the green led always on. Do you now something about please... :(

jose - 回复

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 6

过去的30天: 47

总计 4,024