修复你的物品 社区 商店

Blu Studio Selfie Front Facing Camera Replacement

简介

Use this guide to replace the front facing camera of the Blu Studio Selfie.

你所需要的

  1. Blu Studio Selfie Front Facing Camera Replacement, Rear Cover: 步骤 1 中的图像 1，1

    • Make sure your phone is powered off.

    • Turn the front of the phone away from you.

    • Run your fingers along the sides of the phone to identify where the case can be pulled apart.

    编辑

  2. Blu Studio Selfie Front Facing Camera Replacement: 步骤 2 中的图像 1，1

    • Insert the flat end of your plastic opening into the crevice you found along the side of the phone.

    • Gently apply pressure until you feel the back case pop free of the phone.

    • Continue the previous two steps around the rest of the phone until the case is fully removed.

    编辑

  3. Blu Studio Selfie Front Facing Camera Replacement, Battery: 步骤 3 中的图像 1，2 Blu Studio Selfie Front Facing Camera Replacement, Battery: 步骤 3 中的图像 2，2

    • Identify the crevice at the bottom of the battery.

    • There should be enough space for you to fit your fingernail between the battery and the phone.

    • Gently lift the battery free of the phone.

    编辑

  5. Blu Studio Selfie Front Facing Camera Replacement, Midframe: 步骤 4 中的图像 1，1

    • Remove all the 4mm Phillips #000 screws from the midframe.

    编辑

  6. Blu Studio Selfie Front Facing Camera Replacement: 步骤 5 中的图像 1，1

    • Insert the spudger between the midframe and the display assembly.

    • Gently pry up the midframe.

    • When working with electronics, it's important to choose a tool that's ESD-safe to avoid accidental damage to the device. The metal spudger is great when you need serious prying power, but the regular black nylon spudger or a plastic opening tool should be used whenever possible.

    编辑

  7. Blu Studio Selfie Front Facing Camera Replacement: 步骤 6 中的图像 1，1

    • Where the battery rested before, you will find a small clip that holds down the midframe.

    • After the rest of the midframe is detached, from the phone place the flat end of the spudger beneath the clip.

    • Gently lift up on the clip until it comes free.

    • Remove the midframe from the phone.

    编辑

  8. Blu Studio Selfie Front Facing Camera Replacement, Front Facing Camera: 步骤 7 中的图像 1，3 Blu Studio Selfie Front Facing Camera Replacement, Front Facing Camera: 步骤 7 中的图像 2，3 Blu Studio Selfie Front Facing Camera Replacement, Front Facing Camera: 步骤 7 中的图像 3，3

    • Use tweezers to lift the black tab on the ZIF connector and pull the ribbon cable out of place.

    • Using a pair of tweezers for assistance, remove the front facing camera from its case.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

作者

与4其他贡献者

Stacy Kam

于01/20/16注册

630 声望

创作了5篇指南

徽章: 14

+ 11更多徽章

团队

USF Tampa, Team 10-1, Remmell Spring 2016 USF Tampa, Team 10-1, Remmell Spring 2016 的会员

USFT-REMMELL-S16S10G1

4 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 1

总计 446