修复你的物品 社区 商店

Blu Studio 5.5 S Speaker Replacement

简介

This guide will describe how to take apart the Blu Studio 5.5 S to access the phone's speaker.

你所需要的

  1. Blu Studio 5.5 S Speaker Replacement, Back Casing: 步骤 1 中的图像 1，1

    • In order to remove the back case, start by flipping the phone to the back side and look at it from the top.

    编辑

  2. Blu Studio 5.5 S Speaker Replacement, Applying Pressure: 步骤 2 中的图像 1，3 Blu Studio 5.5 S Speaker Replacement, Applying Pressure: 步骤 2 中的图像 2，3 Blu Studio 5.5 S Speaker Replacement, Applying Pressure: 步骤 2 中的图像 3，3

    • Place your finger in the small notch on the left side of the charging port (facing from the back).

    • Once your finger is in the notch, pull the back case towards yourself to remove it.

    编辑

  3. Blu Studio 5.5 S Speaker Replacement, Battery: 步骤 3 中的图像 1，3 Blu Studio 5.5 S Speaker Replacement, Battery: 步骤 3 中的图像 2，3 Blu Studio 5.5 S Speaker Replacement, Battery: 步骤 3 中的图像 3，3

    • Once the back case is removed, locate the battery. It is the large brick embedded in the phone. It has BLU Products, a caution statement, and a barcode on it.

    • Insert your finger into the notch near the lower left of the battery, apply pressure and lift up.

    编辑

  5. Blu Studio 5.5 S Speaker Replacement, Midframe: 步骤 4 中的图像 1，3 Blu Studio 5.5 S Speaker Replacement, Midframe: 步骤 4 中的图像 2，3 Blu Studio 5.5 S Speaker Replacement, Midframe: 步骤 4 中的图像 3，3

    • The speaker is located behind the inner back case. Using a Phillips #0 screwdriver, unscrew the 10, 7mm screws.

    • Using the Phillips #00 screwdriver, unscrew the two, 10mm screws at the bottom.

    编辑

  6. Blu Studio 5.5 S Speaker Replacement, Aesthetic Bottom Case: 步骤 5 中的图像 1，1

    • Apply pressure and pop off the bottom aesthetic case, being careful not to break it.

    编辑

  7. Blu Studio 5.5 S Speaker Replacement: 步骤 6 中的图像 1，3 Blu Studio 5.5 S Speaker Replacement: 步骤 6 中的图像 2，3 Blu Studio 5.5 S Speaker Replacement: 步骤 6 中的图像 3，3

    • Use the Spudger to pop the inner back casing off. Do this by lightly raising the side of the battery housing, then sliding the Spudger around the case.

    • Pick up the inner back case and flip it over.

    编辑

  8. Blu Studio 5.5 S Speaker Replacement, Speaker: 步骤 7 中的图像 1，3 Blu Studio 5.5 S Speaker Replacement, Speaker: 步骤 7 中的图像 2，3 Blu Studio 5.5 S Speaker Replacement, Speaker: 步骤 7 中的图像 3，3

    • The speaker is located on the bottom of the back inner case. To remove it, use a pair of angled tweezers.

    • Use the tweezers to remove the speaker off of the casing.

    • Only put the tweezers in enough to gain leverage.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与5其他贡献者

Cody Dyl

于10/27/14注册

804 声望

创作了5篇指南

徽章: 15

+ 12更多徽章

团队

UMass Dartmouth, Team 4-8, Miles Fall 2014 UMass Dartmouth, Team 4-8, Miles Fall 2014 的会员

UMASSD-MILES-F14S4G8

2 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 1,161