Blackberry Curve 9300 Speaker Replacement

简介

This Speaker Replacement guide was written to help consumers fix their device as easy as possible. The steps show the steps required to replace the speaker.

你所需要的

步骤 1 Battery

Blackberry Curve 9300 Speaker Replacement, Battery: 步骤 1 中的图像 1，1

Place your Blackberry face down in front of you.

翻译

步骤 2

Locate the indent on the bottom of the back cover.
Use your fingernail to lift and remove the back cover.

翻译

步骤 3

From the top, use your fingernail to lift and remove the battery.

翻译

步骤 4 Keyboard

Blackberry Curve 9300 Speaker Replacement, Keyboard: 步骤 4 中的图像 1，1

Use the T6 Torx screwdriver to unscrew the two 5mm screws highlighted.

翻译

步骤 5

Place the phone face up and use tweezers to securely grip and lift the screen upwards.

翻译

步骤 6

Use a plastic opening tool to lift the bottom edge of the front cover.

翻译

步骤 7

Use your nails to unclip the sides of the frame from the phone.

翻译

步骤 8

Lift and remove the frame.

翻译

步骤 9

Lift and remove the keyboard.

翻译

步骤 10 Speaker

Blackberry Curve 9300 Speaker Replacement, Speaker: 步骤 10 中的图像 1，1

Locate and remove the two 5mm screws on top of the keyboard base with a T6 Torx screwdriver.

翻译

步骤 11

Carefully pull keyboard base up and away from phone.
Disconnect keyboard base from phone completely.

翻译

步骤 12

Blackberry Curve 9300 Speaker Replacement: 步骤 12 中的图像 3，3

Remove the four 5mm screws on the top and bottom of phone with a T6 Torx screwdriver

翻译

步骤 13

Using a prying tool, find the crease below the screen.
Insert where shown and use the tool to unclip the two sides of screen from body.
Prying tool goes approximately midway between the top and bottom edge of the screen.