跳转到主内容

Blackberry Curve 8330 Keyboard Replacement

你所需要的

  1. Blackberry Curve 8330 Keyboard Replacement, Remove Back Cover: 步骤 1 中的图像 1,1
    • We did not have an actual back cover or battery for the phone we were given. Therefore, the first couple of steps will be without pictures.

    • Hold the phone with the back side facing you.

    • Press down on the silver tab towards the bottom end of the phone.

    • Carefully lift up the back casing to reveal the battery.

  2. Blackberry Curve 8330 Keyboard Replacement, Remove Battery: 步骤 2 中的图像 1,1
    • Put your finger on the top left corner of the battery and lift the battery up and out of its housing.

    • The phone should now look like this.

  3. Blackberry Curve 8330 Keyboard Replacement, Keyboard: 步骤 3 中的图像 1,1
    • Remove the two top screws using a T5 Torx screwdriver.

  4. Blackberry Curve 8330 Keyboard Replacement: 步骤 4 中的图像 1,2 Blackberry Curve 8330 Keyboard Replacement: 步骤 4 中的图像 2,2
    • Use a plastic opening tool to pry the edges of the bottom cover until it snaps loose.

    • The cover will now pull off easily.

  5. Blackberry Curve 8330 Keyboard Replacement: 步骤 5 中的图像 1,2 Blackberry Curve 8330 Keyboard Replacement: 步骤 5 中的图像 2,2
    • Use a plastic opening tool to pry between the front and back cover.

    • Start prying from wherever it is easiest to separate the silver and black plastic of the covers.

    • There are 5 securing clips on the front panel to disconnect.

    • Pry gently to prevent breaking the plastic clips when removing the front panel.

    • Once all the clips have been freed, the front cover will lift away from the phone.

  6. Blackberry Curve 8330 Keyboard Replacement: 步骤 6 中的图像 1,1
    • Lift the flexible keypad away from the device. It should come off easily.

  7. Blackberry Curve 8330 Keyboard Replacement: 步骤 7 中的图像 1,2 Blackberry Curve 8330 Keyboard Replacement: 步骤 7 中的图像 2,2
    • Use a T6 Torx Screwdriver to remove the four corner screws on the keyboard's housing.

    • Lift the keyboard frame away from the device.

    • There may be a small amount of adhesive at the bottom of the frame that needs to be pulled away.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Nolan Reker

于04/04/12注册

30 声望

撰写一个指南

团队

Cal Poly, Team 14-11, Forte Spring 2012 Cal Poly, Team 14-11, Forte Spring 2012 的会员

CPSU-FORTE-S12S14G11

5 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 1,827