简介

This guide will show you how to:

  • Remove the battery
  • Remove the front panel
  • Replace the keyboard
  1. Use a plastic opening tool to gently pry the bottom cover loose.
    • Use a plastic opening tool to gently pry the bottom cover loose.

    • Do not use excessive force at risk of damaging the antenna, which is under this casing.

    • Pull the cover from the front of the phone after the back is loose.

    添加评论

  2. Remove the two top screws with a T5 Torx screwdriver.
    • Remove the two top screws with a T5 Torx screwdriver.

    • The screws are 8mm long.

    添加评论

    • Gently pry off the top of the side casings.

    • The side casings cannot be fully removed yet because they are screwed on at the bottom.

    添加评论

    • Use a plastic opening tool to detach the securing clips holding the the front panel in place.

    • There are six securing clips total.

    添加评论

    • Remove the front panel.

    • You may need to apply some force because the front panel is attached to the rest of the device with adhesive.

    添加评论

    • Remove the keyboard.

    • Be careful not to bend or fold the keyboard, as it can break easily.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Yegor Pomortsev

于2011年10月12日注册

123 信誉积分

创作了2篇指南

团队

Cal Poly, Team 3-6, Regan Fall 2011 Cal Poly, Team 3-6, Regan Fall 2011 的会员

CPSU-REGAN-F11S3G6

5 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 2

总计 1,910