修复你的物品 社区 商店

Blackberry Bold 9900 Back Case Replacement

简介

Replacing the back case of the BlackBerry Bold 9900 is a tedious task, but it will allow you to become more familiar with your device, increase the lifespan of the device, and reduce e-waste.

你所需要的

  1. Blackberry Bold 9900 Back Case Replacement, Battery: 步骤 1 中的图像 1，1

    • Place phone screen down.

    • Use your finger to life upward on the battery case.

    • Pull the cover away from the battery.

    编辑

  2. Blackberry Bold 9900 Back Case Replacement: 步骤 2 中的图像 1，1

    • Lift the edge of battery with the green stripe upward to remove battery.

    编辑

  3. Blackberry Bold 9900 Back Case Replacement, Mini-SIM removal: 步骤 3 中的图像 1，1

    • The Mini-SIM card is located inside the red rectangle.

    • To remove the Mini-SIM Card, push and slide the card inward towards the top of the phone. It will be ejected.

    编辑

  4. Blackberry Bold 9900 Back Case Replacement, MicroSD card: 步骤 4 中的图像 1，2 Blackberry Bold 9900 Back Case Replacement, MicroSD card: 步骤 4 中的图像 2，2

    • The MicroSD card is located where the red rectangle is shown.

    • To remove MicroSD card, push the card inward towards the top of the phone then release. The MicroSD card will be ejected.

    编辑

  6. Blackberry Bold 9900 Back Case Replacement, Keyboard: 步骤 5 中的图像 1，2 Blackberry Bold 9900 Back Case Replacement, Keyboard: 步骤 5 中的图像 2，2

    • Lift the bezel at the bottom of the phone up and peel it away from the phone.

    编辑

  7. Blackberry Bold 9900 Back Case Replacement: 步骤 6 中的图像 1，2 Blackberry Bold 9900 Back Case Replacement: 步骤 6 中的图像 2，2

    • Remove the two exposed screws using the T5 Torx screwdriver.

    编辑

  8. Blackberry Bold 9900 Back Case Replacement: 步骤 7 中的图像 1，1

    • Now lever the keyboard up using the screwdriver in the indicated hole.

    编辑

  9. Blackberry Bold 9900 Back Case Replacement: 步骤 8 中的图像 1，2 Blackberry Bold 9900 Back Case Replacement: 步骤 8 中的图像 2，2

    • The keyboard is attached via a ribbon cable. Pull the cable up to remove the keyboard.

    编辑

  10. Blackberry Bold 9900 Back Case Replacement, Back Case: 步骤 9 中的图像 1，1

    • Using the T5 Torx Screwdriver, remove the four torx screws that are located on the bottom half of the device

    编辑

  11. Blackberry Bold 9900 Back Case Replacement: 步骤 10 中的图像 1，1

    • Now, carefully and gently using your fingers, lift and remove the assembly from the back case.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

作者

与4其他贡献者

Sowmika

于01/30/18注册

253 声望

创作了2篇指南

徽章: 6

+ 3更多徽章

团队

Baylor, Team S1-G4, Johnson Spring 2018 Baylor, Team S1-G4, Johnson Spring 2018 的会员

BU-JOHNSON-S18S1G4

3 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 7

过去 30 天： 13

总计 1,430