Place your Blackberry facedown in front of you.
  • Place your Blackberry facedown in front of you.

添加评论

Press the cover release button on the bottom of your device. Lift and remove the back cover.
  • Press the cover release button on the bottom of your device. Lift and remove the back cover.

添加评论

From the top, use your fingernail to lift the battery out.
  • From the top, use your fingernail to lift the battery out.

添加评论

Mac RAM 套件
加速你的Mac。充分利用它的内存。
Mac RAM 套件
从Mac中清理出更多内存。
Remove the SIM card.
  • Remove the SIM card.

添加评论

Remove the six 7.0mm Torx screws securing the rear case to the rest of the phone.
  • Remove the six 7.0mm Torx screws securing the rear case to the rest of the phone.

添加评论

Use the plastic opening tool to remove the rear case.
  • Use the plastic opening tool to remove the rear case.

添加评论

Using the same plastic opening tool, lift out the motherboard assembly.
  • Using the same plastic opening tool, lift out the motherboard assembly.

  • Remove the motherboard assembly from left to right, using caution near the audio jack on the right side of the device.

Using a spudger detach the LCD ribbon cable (The red connector) above the audio jack

devo1909 - 回复

Using a spudger, pry the top of the metal casing off. There are two pins holding it in place; it should pop off easily.
  • Using a spudger, pry the top of the metal casing off. There are two pins holding it in place; it should pop off easily.

  • Repeat to the bottom.

  • This step requires pristine dexterity. Try to find a friend with smaller fingers if necessary.

添加评论

Lift the trackball out of its socket.
  • Lift the trackball out of its socket.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Kelly

于2012年01月18日注册

542 信誉积分

创作了6篇指南

团队

Cal Poly, Team 8-17, Maness Winter 2012 Cal Poly, Team 8-17, Maness Winter 2012 的会员

CPSU-MANESS-W12S8G17

4 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 5

过去的30天: 14

总计 10,560