Depress the battery cover release button and remove the battery cover Remove the battery from the phone before continuing.
  • Depress the battery cover release button and remove the battery cover

  • Remove the battery from the phone before continuing.

  • Slide the yellow button toward the battery to eject the SIM card

  • Remove the MicroSD card from the SD slot (if present)

添加评论

There will be a silver bezel around the edge (the dog ate mine!) Insert pry tool near the padlock icon and gently work your way around the bezel to pry it off and reveal the screws.
  • There will be a silver bezel around the edge (the dog ate mine!)

  • Insert pry tool near the padlock icon and gently work your way around the bezel to pry it off and reveal the screws.

添加评论

Grab your T5 Torx screwdriver, and remove all 8 screws Be careful when taking out screws. The silver ones go in the corners, black ones in the middle
  • Grab your T5 Torx screwdriver, and remove all 8 screws

  • Be careful when taking out screws. The silver ones go in the corners, black ones in the middle

添加评论

With the 8 screws removed, you can gently pry the back cover off. Be gentle, as it is still connected by a ribbon cable Gently pry ribbon cable off, and then you will have the back cover fully removed
  • With the 8 screws removed, you can gently pry the back cover off. Be gentle, as it is still connected by a ribbon cable

  • Gently pry ribbon cable off, and then you will have the back cover fully removed

添加评论

The next step is to remove the board. There are 3 ribbon cables connected to it Disconnect the first ribbon cable
  • The next step is to remove the board.

  • There are 3 ribbon cables connected to it

  • Disconnect the first ribbon cable

  • When you remove the second ribbon cable it will reveal the third ribbon cable

添加评论

With the 3 ribbon cables disconnected you can gently pry the board up and away from phone With the board removed, you can then simply lift out the LCD display With the board removed, you can then simply lift out the LCD display
  • With the 3 ribbon cables disconnected you can gently pry the board up and away from phone

  • With the board removed, you can then simply lift out the LCD display

添加评论

Once the LCD is removed, the handset disassembled.
  • Once the LCD is removed, the handset disassembled.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

7等其他人完成本指南。

daniel

于2011年12月22日注册

342 信誉积分

创作了2篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 17

总计 6,485