修复你的物品 社区 商店

BlackBerry Pearl Flip 8220 Circuit Board and Roller Ball

简介

The purpose is to remove both the main circuit board and the roller ball unit from the main frame of the phone.

你所需要的

  1. BlackBerry Pearl Flip 8220 Circuit Board and Roller Ball, Circuit Board and Roller Ball: 步骤 1 中的图像 1，3 BlackBerry Pearl Flip 8220 Circuit Board and Roller Ball, Circuit Board and Roller Ball: 步骤 1 中的图像 2，3 BlackBerry Pearl Flip 8220 Circuit Board and Roller Ball, Circuit Board and Roller Ball: 步骤 1 中的图像 3，3

    • Remove four screws total on the back of the phone casing near edge of battery area.

    • Two screws that are closer to the top of the phone are protected by plastic stoppers. Remove them then remove the screws.

    • There are two more screws on either side of where the battery was located. remove them as well.

    编辑

  2. BlackBerry Pearl Flip 8220 Circuit Board and Roller Ball: 步骤 2 中的图像 1，3 BlackBerry Pearl Flip 8220 Circuit Board and Roller Ball: 步骤 2 中的图像 2，3 BlackBerry Pearl Flip 8220 Circuit Board and Roller Ball: 步骤 2 中的图像 3，3

    • Remove the bottom plastic piece.

    • This may require prying from a few different directions. The plastic blue prying tool featured here may be required.

    编辑

  4. BlackBerry Pearl Flip 8220 Circuit Board and Roller Ball: 步骤 3 中的图像 1，3 BlackBerry Pearl Flip 8220 Circuit Board and Roller Ball: 步骤 3 中的图像 2，3 BlackBerry Pearl Flip 8220 Circuit Board and Roller Ball: 步骤 3 中的图像 3，3

    • Once the keypad is removed, the buttons on the sides of the phone will fall out.

    • You will need to loosen the board from the right side opposite the charging ports.

    • Pull gently towards the right side so the ports clear the plastic casing.

    • Gently flip the board over to the left.

    编辑

  5. BlackBerry Pearl Flip 8220 Circuit Board and Roller Ball: 步骤 4 中的图像 1，3 BlackBerry Pearl Flip 8220 Circuit Board and Roller Ball: 步骤 4 中的图像 2，3 BlackBerry Pearl Flip 8220 Circuit Board and Roller Ball: 步骤 4 中的图像 3，3

    • On the back of the circuit board you will find a small rectangular blue piece with a black 'L' shape in the middle.

    • Gently detach this from the back of the main board.

    • Now you may fully remove the main board.

    编辑

  6. BlackBerry Pearl Flip 8220 Circuit Board and Roller Ball: 步骤 5 中的图像 1，3 BlackBerry Pearl Flip 8220 Circuit Board and Roller Ball: 步骤 5 中的图像 2，3 BlackBerry Pearl Flip 8220 Circuit Board and Roller Ball: 步骤 5 中的图像 3，3

    • What is left inside the phone is the roller ball.

    • Gently use the plastic blue tool to detach it from the frame.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与9其他贡献者

Ashley

于04/15/13注册

318 声望

创作了3篇指南

徽章: 6

+ 3更多徽章

团队

SUNY Cortland, Team 1-5, Getto Spring 2013 SUNY Cortland, Team 1-5, Getto Spring 2013 的会员

SUNYCORT-GETTO-S13S1G5

3 名成员

创作了3篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 6

总计 795