跳转到主内容

简介

This will guide you on how to dissassemble your blackberry curve to replace the broken speaker with a new speaker.

  1. Pry off the back and separate it from the front of the phone case. You will see the battery once the cover is removed.
    • Pry off the back and separate it from the front of the phone case. You will see the battery once the cover is removed.

  2. On both sides of the battery, there is a lighter grey half-circle. This is the best place to use your fingers to gently lift the battery free of the housing. On both sides of the battery, there is a lighter grey half-circle. This is the best place to use your fingers to gently lift the battery free of the housing.
    • On both sides of the battery, there is a lighter grey half-circle. This is the best place to use your fingers to gently lift the battery free of the housing.

  3. Using a small plastic opening tool, remove the lower rear cover.
    • Using a small plastic opening tool, remove the lower rear cover.

  4. Remove six screws from the midframe of the device.
    • Remove six screws from the midframe of the device.

  5. Remove the midframe from the phone.
    • Remove the midframe from the phone.

  6. Gently pry the back the plastic tabs that secure the motherboard to the case. Slowly work your way around the case until the tabs until the motherboard comes free.
    • Gently pry the back the plastic tabs that secure the motherboard to the case.

    • Slowly work your way around the case until the tabs until the motherboard comes free.

    • Remove the motherboard.

    • The keypad and navigation ball may become loose and fall away from the motherboard.

  7. Carefully detach the antenna from the two clips on the side of the motherboard. Carefully disconnect the antenna from the motherboard.
    • Carefully detach the antenna from the two clips on the side of the motherboard.

    • Carefully disconnect the antenna from the motherboard.

  8. Carefully disconnect the ribbon cable on the bottom right of the motherboard.
    • Carefully disconnect the ribbon cable on the bottom right of the motherboard.

  9. Remove the screen so that it does not get damaged. Remove the screen so that it does not get damaged.
    • Remove the screen so that it does not get damaged.

  10. Lift the up motherboard from the bottom edge to reveal to ribbon cables. Carefully disconnect the two ribbon cables connecting the motherboard and display.
    • Lift the up motherboard from the bottom edge to reveal to ribbon cables.

    • Carefully disconnect the two ribbon cables connecting the motherboard and display.

    • Remove the motherboard.

  11. Replace the entire center piece of the case to replace the speaker.
    • Replace the entire center piece of the case to replace the speaker.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Johnny Tran

于2011年09月10日注册

473 信誉积分

创作了4篇指南

团队

Cuesta, Team 1-3, Zipperian Fall 2011 Cuesta, Team 1-3, Zipperian Fall 2011 的会员

CUESTA-ZIPPERIAN-F11S1G3

3 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 2

总计 7,663