1. Remove battery cover and battery on the back of the device.
    • Remove battery cover and battery on the back of the device.

  2. Using a plastic opening tool, remove the bottom cover.
    • Using a plastic opening tool, remove the bottom cover.

    • This will reveal 6 screws on the back, remove the screws and be careful not to lose them.

    • Remove the rear cover of the device.

    • Remove the motherboard part of the phone from the last piece of case by releasing the black tabs on both sides.

    • Detach the ribbon cable on the front of the motherboard.

    • Remove the screen to keep it from being damaged.

    • Detach the antenna wire at all 3 locations.

    • Tilt the motherboard up and detach both ribbon connections.

    • Remove the motherboard.

    • Replace the entire center piece of the case to replace the antenna.

结论

To reassemble your device, follow these instructions in reverse order.

Johnny Tran

于2011年09月10日注册

473 信誉积分

创作了4篇指南

团队

Cuesta, Team 1-3, Zipperian Fall 2011 Cuesta, Team 1-3, Zipperian Fall 2011 的会员

CUESTA-ZIPPERIAN-F11S1G3

3 名成员

创作了8篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 3

总计 5,590