Skip to main content

介绍

This Repair guide will walk you through the steps on how to replace a RIM Blackberry 8700c logic board.

配件

没有特定配件。

  1. Remove the back cover by pushing down on the button and sliding the cover towards the bottom of the phone. Set the cover aside.  The battery will now be exposed.
    • Remove the back cover by pushing down on the button and sliding the cover towards the bottom of the phone.

    • Set the cover aside. The battery will now be exposed.

  2. Remove the battery by pulling back on the notch on top edge of the battery. Set the battery aside.
    • Remove the battery by pulling back on the notch on top edge of the battery.

    • Set the battery aside.

  3. Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物

    Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物
  4. Unscrew and remove all four T6 Torx screws.
    • Unscrew and remove all four T6 Torx screws.

  5. Pull the back cover of the phone off and set it aside. Pull the back cover of the phone off and set it aside.
    • Pull the back cover of the phone off and set it aside.

  6. Unscrew and remove all 4 T6 Torx screws. Unscrew and remove all 4 T6 Torx screws.
    • Unscrew and remove all 4 T6 Torx screws.

  7. Lift and remove inner back cover and set aside. A small side piece may fall away but is simple to reattach. Remove logic board by gently lifting it off of the front cover of the phone.
    • Lift and remove inner back cover and set aside.

    • A small side piece may fall away but is simple to reattach.

    • Remove logic board by gently lifting it off of the front cover of the phone.

    • New logic board can now simply be set in place.

结论

To reassemble your device, follow these instructions in reverse order.

arlebrun

于2009年12月02日注册

1 Reputation

撰写一个指南

Team

Cal Poly, Team 18-4, Maness Fall 2009 Cal Poly, Team 18-4, Maness Fall 2009 的会员

CPSU-MANESS-F09S18G4

4 名成员

创作了5篇指南

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 3,130