简介

This will show you how to repair the vibrating motor in your blackberry.

配件

无需配件。

  1. Remove the battery cover and battery before continuing.
    • Remove the battery cover and battery before continuing.

    • Remove the six T6 Torx screws on the back of the phone.

    • Make sure to keep the screws somewhere that they will not get lost.

    添加评论

  2. Using your finger nail or a spudger, carefully pry up the back cover.
    • Using your finger nail or a spudger, carefully pry up the back cover.

    • Begin in one spot and slowly circle around the device as you pry up all of the back cover.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Lift off the back cover.

    添加评论

    • Remove the two T6 screws.

    添加评论

    • Remove the daughterboard.

    • Remove the exposed vibration motor.

    添加评论

    • Replace with new vibration motor

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Neil Johnson

于2010年01月24日注册

12 信誉积分

创作了6篇指南

团队

Cal Poly, Team 14-44, Regan Winter 2010 Cal Poly, Team 14-44, Regan Winter 2010 的会员

CPSU-REGAN-W10S14G44

4 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 6

总计 4,382