跳转到主内容

简介

This is a guide on how to replace the logic board on your Blackberry 7510.

配件

没有特定配件。

  1. Remove the battery cover and battery before continuing.
    • Remove the battery cover and battery before continuing.

    • Remove the six T6 Torx screws on the back of the phone.

    • Make sure to keep the screws somewhere that they will not get lost.

  2. Using your finger nail or a spudger, carefully pry up the back cover.
    • Using your finger nail or a spudger, carefully pry up the back cover.

    • Begin in one spot and slowly circle around the device as you pry up all of the back cover.

  3. Lift off the back cover.
    • Lift off the back cover.

  4. Remove the two T6 screws.
    • Remove the two T6 screws.

  5. iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    现在开始购物

    iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    现在开始购物
  6. Remove the daughterboard. Remove the exposed vibration motor.
    • Remove the daughterboard.

    • Remove the exposed vibration motor.

  7. Using the T6 Torx screwdriver,  remove the top screw.
    • Using the T6 Torx screwdriver, remove the top screw.

  8. Using your spudger, carefully pry off back plate.
    • Using your spudger, carefully pry off back plate.

    • Use the same technique as with the plastic back cover. Circle around the back plate until all of it is pried up.

  9. Remove the front cover and keypad.
    • Remove the front cover and keypad.

  10. Remove one T6 Torx screw in the front bottom right of the board.
    • Remove one T6 Torx screw in the front bottom right of the board.

  11. Carefully pry the screen from the board with your spudger. After prying it up, remove the screen from the board.
    • Carefully pry the screen from the board with your spudger.

    • After prying it up, remove the screen from the board.

  12. Unscrew center T6 Torx screw in the center of the logic board. Remove the logic board from the phone.
    • Unscrew center T6 Torx screw in the center of the logic board.

    • Remove the logic board from the phone.

    • Replace with new logic board.

结论

To reassemble your device, follow these instructions in reverse order.

Neil Johnson

于2010年01月24日注册

12 信誉积分

创作了6篇指南

团队

Cal Poly, Team 14-44, Regan Winter 2010 Cal Poly, Team 14-44, Regan Winter 2010 的会员

CPSU-REGAN-W10S14G44

4 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 1,788