简介

This guide demonstrates how to remove and replace the LCD screen.

配件

无需配件。

  1. Remove the battery cover and battery before continuing.
    • Remove the battery cover and battery before continuing.

    • Remove the six T6 Torx screws on the back of the phone.

    • Make sure to keep the screws somewhere that they will not get lost.

    添加评论

  2. Using your finger nail or a spudger, carefully pry up the back cover.
    • Using your finger nail or a spudger, carefully pry up the back cover.

    • Begin in one spot and slowly circle around the device as you pry up all of the back cover.

    添加评论

    • Lift off the back cover.

    添加评论

    • Remove the two T6 screws.

    添加评论

    • Remove the daughterboard.

    • Remove the exposed vibration motor.

    添加评论

    • Unscrew the screw holding the back plate.

    添加评论

    • Carefully pry off front cover. Make sure the plastic clips are unlatched before applying force.

    • Lift off front cover from metal plate.

    添加评论

    • Pry off the LCD screen with spudger at the two clips.

    添加评论

    • Remove the LCD screen and replace it with a new one.

    • Careful not to rip the LCD ribbon.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Neil Johnson

于2010年01月24日注册

12 信誉积分

创作了6篇指南

团队

Cal Poly, Team 14-44, Regan Winter 2010 Cal Poly, Team 14-44, Regan Winter 2010 的会员

CPSU-REGAN-W10S14G44

4 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 2

总计 2,504