当前版本的文档还未经巡查,您可以查看最新的已查核版本。
-
-
Apply pressure to the lock button on the back of the device.
-
Slide the battery cover down towards the bottom of the device, revealing the battery compartment.
-
-
-
Locate the four screws along the perimeter of the back casing.
-
Remove the four top screws using a T-6 torx screwdriver.
-
The top four screws are .413 inches.
-
-
Locate two screws within the lower edge of the inner compartment.
-
Remove the two bottom screws using a T-6 torx screwdriver.
-
The bottom two screws are .2 inches in length.
-
The second picture displays the device after the six screws have been removed.
-
-
-
Remove the back casing from the phone by lifting the unhooked portion, then slide the casing towards the top of the device.
-
Make sure all clips holding the case together are unhooked, so no damage is caused to the case.
-
-
Locate on the backside of the phone, a screw towards the top of the device.
-
Using a T-6 screwdriver, remove the screw.
-
After the screw has been removed, carefully lift the side button brace to reveal the side button.
嵌入本指南
选择一个尺寸并复制下面的代码,将本指南作为一个小插件嵌入到你的网站/论坛中。
预览