修复你的物品 社区 商店

本指南有最近更改，您可查看未经巡查的最新版本。

BlackBerry 7290 Side Button Replacement

简介

This guide shows how to remove the side button used to browse through the menus on the RIM BlackBerry 7290.

你所需要的

  1. BlackBerry 7290 Side Button Replacement, Battery: 步骤 1 中的图像 1，3 BlackBerry 7290 Side Button Replacement, Battery: 步骤 1 中的图像 2，3 BlackBerry 7290 Side Button Replacement, Battery: 步骤 1 中的图像 3，3

    • Apply pressure to the lock button on the back of the device.

    • Slide the battery cover down towards the bottom of the device, revealing the battery compartment.

    翻译

  2. BlackBerry 7290 Side Button Replacement: 步骤 2 中的图像 1，3 BlackBerry 7290 Side Button Replacement: 步骤 2 中的图像 2，3 BlackBerry 7290 Side Button Replacement: 步骤 2 中的图像 3，3

    • Locate groove along the right side of the battery compartment.

    • Remove battery by prying between the battery and the groove.

    翻译

  3. BlackBerry 7290 Side Button Replacement, SIM Card: 步骤 3 中的图像 1，1

    • Slide the SIM card holder to the left to unlock the SIM card.

    翻译

  5. BlackBerry 7290 Side Button Replacement: 步骤 4 中的图像 1，2 BlackBerry 7290 Side Button Replacement: 步骤 4 中的图像 2，2

    • Lift the SIM card holder up.

    • Gently remove the SIM card from the SIM card holder by sliding the card along the railing.

    翻译

  6. BlackBerry 7290 Side Button Replacement, Side Button: 步骤 5 中的图像 1，1

    • Locate the four screws along the perimeter of the back casing.

    • Remove the four top screws using a T-6 torx screwdriver.

    • The top four screws are .413 inches.

    翻译

  7. BlackBerry 7290 Side Button Replacement: 步骤 6 中的图像 1，2 BlackBerry 7290 Side Button Replacement: 步骤 6 中的图像 2，2

    • Locate two screws within the lower edge of the inner compartment.

    • Remove the two bottom screws using a T-6 torx screwdriver.

    • The bottom two screws are .2 inches in length.

    • The second picture displays the device after the six screws have been removed.

    翻译

  8. BlackBerry 7290 Side Button Replacement: 步骤 7 中的图像 1，1

    • Use the plastic opening tool to apply pressure on the two clips that are located at the bottom of the phone.

    翻译

  9. BlackBerry 7290 Side Button Replacement: 步骤 8 中的图像 1，3 BlackBerry 7290 Side Button Replacement: 步骤 8 中的图像 2，3 BlackBerry 7290 Side Button Replacement: 步骤 8 中的图像 3，3

    • Remove the back casing from the phone by lifting the unhooked portion, then slide the casing towards the top of the device.

    • Make sure all clips holding the case together are unhooked, so no damage is caused to the case.

    翻译

  10. BlackBerry 7290 Side Button Replacement: 步骤 9 中的图像 1，2 BlackBerry 7290 Side Button Replacement: 步骤 9 中的图像 2，2

    • Locate on the backside of the phone, a screw towards the top of the device.

    • Using a T-6 screwdriver, remove the screw.

    • After the screw has been removed, carefully lift the side button brace to reveal the side button.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与13其他贡献者

Jschutt

于11/05/09注册

79 声望

撰写一个指南

徽章: 7

+ 4更多徽章

团队

Cal Poly, Team 19-6, Maness Fall 2009 Cal Poly, Team 19-6, Maness Fall 2009 的会员

CPSU-MANESS-F09S19G6

5 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 5

过去 30 天： 6

总计 3,722