简介

Before replacing knobs you will have to disassemble oven to take off the knobs and faceplate.

配件

无需配件。

  1. Make sure that the toaster is unplugged before you begin.
    • Make sure that the toaster is unplugged before you begin.

    • Turn the toaster upside down and remove the two Phillips #4 1 cm screws attached to the side panels.

    添加评论

  2. Pull down and out to remove side panels from the unit
    • Pull down and out to remove side panels from the unit

    • Repeat for the other side.

    添加评论

    • Remove the bottom vent.

    • This should come off fairly easy.

    添加评论

  3. 订单满 $20 免运费
    结账时使用优惠码 BLUEANDBLACK
    订单满 $20 免运费
    使用优惠码 BLUEANDBLACK
    • Remove the two Phillips #4 1 cm screws that connect the bottom panel to the unit.

    添加评论

    • Remove the crumb tray (bottom metal panel) from the toaster unit.

    添加评论

    • Remove the aluminum strip on the bottom of the unit.

    添加评论

    • Remove knobs by pulling up on them.

    添加评论

    • Unhook the bottom of the display panel from the toaster unit.

    • It will be a little tough to pry off, but don't be afraid to be forceful.

    添加评论

    • Begin to detach the back panel from the toaster unit and unhook the rest of the display panel.

    • This will also be a little tough to get off, but don't be afraid to be forceful.

    添加评论

终点

Jonathan

于2012年09月18日注册

135 信誉积分

创作了5篇指南

团队

Cal Poly, Team 2-10, Propen Fall 2012 Cal Poly, Team 2-10, Propen Fall 2012 的会员

CPSU-PROPEN-F12S2G10

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 4

过去的30天: 15

总计 2,625