修复你的物品 社区 商店

Black and Decker TR1278B Bread Grabber Spring Replacement

简介

This is a replacement guide for the bread grabber springs on the Black and Decker TR1278B.

你所需要的

  1. Black and Decker TR1278B Bread Grabber Spring Replacement, Top Cover: 步骤 1 中的图像 1，1

    • Unplug the toaster before disassembly.

    • Remove the carriage lever by pulling it away from the toaster.

    编辑

  2. Black and Decker TR1278B Bread Grabber Spring Replacement: 步骤 2 中的图像 1，1

    • Toaster will be turned upside down. Clear crumb tray or work over a paper towel.

    • Turn the toaster upside down.

    • Unscrew all four 4mm screws on the bottom using a Phillip's head #2 (PH2) screwdriver.

    • Or a slightly different model has six screws that require an allen wrench (hex key). Ones that have a ball end will not work. I had to use one that had more of a Star of David, pointy pattern to it.

    编辑

  3. Black and Decker TR1278B Bread Grabber Spring Replacement: 步骤 3 中的图像 1，1

    • Detach the bottom from the front cover using the plastic opening tool.

    编辑

  5. Black and Decker TR1278B Bread Grabber Spring Replacement: 步骤 4 中的图像 1，1

    • Turn the toaster right side up.

    • Support the bottom. The ribbon cable that connects the toaster to the front cover can be damaged.

    • Lift the front cover.

    • Lift carefully. Again the ribbon cable can be damaged.

    编辑

  6. Black and Decker TR1278B Bread Grabber Spring Replacement: 步骤 5 中的图像 1，1

    • Detach the bundled cable connector from the toaster by carefully pulling it away from the circuit board.

    编辑

  7. Black and Decker TR1278B Bread Grabber Spring Replacement, Bread Grabber Spring: 步骤 6 中的图像 1，1

    • Locate the spring

    编辑

  8. Black and Decker TR1278B Bread Grabber Spring Replacement: 步骤 7 中的图像 1，1

    • Press down on the toaster lever to gain access to the grabber spring located behind the large metal plate.

    • Use metal spudger to loosen clamps on spring.

    编辑

  9. Black and Decker TR1278B Bread Grabber Spring Replacement: 步骤 8 中的图像 1，1
    在这个步骤中使用的工具：
    Tweezers
    $4.99
    购买

    • Use needle nose tweezers to pull the spring off of its hook.

    • Repeat this step for the opposite side.

    编辑

  10. Black and Decker TR1278B Bread Grabber Spring Replacement: 步骤 9 中的图像 1，1

    • Remove the old spring from the toaster unit to insert the new one.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与4其他贡献者

Brea-Monique

于02/15/17注册

351 声望

创作了3篇指南

徽章: 8

+ 5更多徽章

团队

USF Tampa, Team 8-1, Eyestone Spring 2017 USF Tampa, Team 8-1, Eyestone Spring 2017 的会员

USFT-EYESTONE-S17S8G1

3 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 7

过去 30 天： 25

总计 1,203