修复你的物品 社区 商店

Black and Decker LDX 120C Chuck Replacement

简介

If the chuck is jammed or not tightening up; the guide will illustrate a step by step process to help solve the problem.

你所需要的

  1. Black and Decker LDX 120C Chuck Replacement, Outer Case: 步骤 1 中的图像 1，1

    • For this guide we will need to use a 1.0 mm phillips #1 screw.

    • There are a total of thirteen screws that need to be removed in order to open the drill and access the interior components.

    编辑

  2. Black and Decker LDX 120C Chuck Replacement: 步骤 2 中的图像 1，1

    • Remove the four screws on the back top side of the drill.

    编辑

  3. Black and Decker LDX 120C Chuck Replacement: 步骤 3 中的图像 1，1

    • Remove the four screws that connect the chuck to the drill.

    编辑

  4. Black and Decker LDX 120C Chuck Replacement: 步骤 4 中的图像 1，1

    • Remove the five screws on the front side of the drill.

    编辑

  5. Black and Decker LDX 120C Chuck Replacement: 步骤 5 中的图像 1，1

    • Gently grab both sides of the drill casing, and separate both sides from each other.

    编辑

  7. Black and Decker LDX 120C Chuck Replacement: 步骤 6 中的图像 1，1

    • At this point you should be able to separate both as illustrated.

    编辑

  8. Black and Decker LDX 120C Chuck Replacement: 步骤 7 中的图像 1，1

    • Now all the components of the drill are visible and can be accessed.

    编辑

  9. Black and Decker LDX 120C Chuck Replacement, Chuck: 步骤 8 中的图像 1，1

    • After following the prerequisite, the drill is now open.

    • The interior components can now be accessed.

    编辑

  10. Black and Decker LDX 120C Chuck Replacement: 步骤 9 中的图像 1，1

    • Separate the top part(the chuck and motor) from the rest of the drill.

    编辑

  11. Black and Decker LDX 120C Chuck Replacement: 步骤 10 中的图像 1，1

    • While separating the top from the rest, do this carefully without over stretching the wires so that no connection is damaged.

    编辑

  12. Black and Decker LDX 120C Chuck Replacement: 步骤 11 中的图像 1，1

    • To remove the motor simply twist as illustrated in the picture.

    编辑

  13. Black and Decker LDX 120C Chuck Replacement: 步骤 12 中的图像 1，1

    • The three metal tips in the front are the ones that are controlled by the chuck to hold and release the screw.

    编辑

  14. Black and Decker LDX 120C Chuck Replacement: 步骤 13 中的图像 1，1

    • To test the chuck twist the head as shown in the illustration.

    • If the three metal tips don't move upon twisting then the chuck isn't working effectively and will need to be replaced since the inside of the chuck can't be accessed.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与1其他贡献者

jeffrey zakka

于02/09/16注册

735 声望

创作了6篇指南

徽章: 14

+ 11更多徽章

团队

USF Tampa, Team 11-5, Cheng Spring 2016 USF Tampa, Team 11-5, Cheng Spring 2016 的会员

USFT-CHENG-S16S11G5

5 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 11

过去 30 天： 31

总计 2,674