修复你的物品 社区 商店

Black and Decker FT1000 Type 1 Blower Switch Replacement

简介

Black and Decker only replaces the switch with a complete motor, so this guide will replace the switch with a commonly available switch.

你所需要的

  1. Black and Decker FT1000 Type 1 Blower Switch Replacement, Black and Decker FT1000 Blower: 步骤 1 中的图像 1，2 Black and Decker FT1000 Type 1 Blower Switch Replacement, Black and Decker FT1000 Blower: 步骤 1 中的图像 2，2

    • This is the blower. I have removed the nozzle and strap.

    编辑

  2. Black and Decker FT1000 Type 1 Blower Switch Replacement: 步骤 2 中的图像 1，1

    • Remove Screws.

    编辑

  3. Black and Decker FT1000 Type 1 Blower Switch Replacement: 步骤 3 中的图像 1，1

    • Remove rear cover. It helps to hold the plug tight to the front housing so the wires stay in place.

    编辑

  4. Black and Decker FT1000 Type 1 Blower Switch Replacement: 步骤 4 中的图像 1，3 Black and Decker FT1000 Type 1 Blower Switch Replacement: 步骤 4 中的图像 2，3 Black and Decker FT1000 Type 1 Blower Switch Replacement: 步骤 4 中的图像 3，3

    • Notice the switch is fine, it's simply the plastic armature that is broken.

    • The broken piece is only included with the motor and switch.

    编辑

  6. Black and Decker FT1000 Type 1 Blower Switch Replacement: 步骤 5 中的图像 1，1

    • This switch is easy to find. It's just a single position single throw switch.

    • I was able to buy it at a home improvement store for $4.00.

    • It even fits nicely in the cutout for the original switch/armature.

    编辑

  7. Black and Decker FT1000 Type 1 Blower Switch Replacement: 步骤 6 中的图像 1，3 Black and Decker FT1000 Type 1 Blower Switch Replacement: 步骤 6 中的图像 2，3 Black and Decker FT1000 Type 1 Blower Switch Replacement: 步骤 6 中的图像 3，3

    • Remove the switch/armature.

    • Remove the tension plate (the metal piece).

    • Put in the switch. The terminals are at a bad angle, so we will bend them to fit.

    编辑

  8. Black and Decker FT1000 Type 1 Blower Switch Replacement: 步骤 7 中的图像 1，2 Black and Decker FT1000 Type 1 Blower Switch Replacement: 步骤 7 中的图像 2，2

    • Bend slowly and carefully.

    • Try it in and see how well it fits. It might need some tweaking.

    编辑

  9. Black and Decker FT1000 Type 1 Blower Switch Replacement: 步骤 8 中的图像 1，2 Black and Decker FT1000 Type 1 Blower Switch Replacement: 步骤 8 中的图像 2，2

    • Now remove the actual electrical switch. No need to worry about the wiring, its just open and closed.

    编辑

  10. Black and Decker FT1000 Type 1 Blower Switch Replacement: 步骤 9 中的图像 1，1

    • The black wire gets a new wider terminal and just plugs on.

    • The other wire needs to be a bit longer, so it gets an extension and a new terminal.

    • I used simple crimp on terminals and splice.

    编辑

  11. Black and Decker FT1000 Type 1 Blower Switch Replacement: 步骤 10 中的图像 1，2 Black and Decker FT1000 Type 1 Blower Switch Replacement: 步骤 10 中的图像 2，2

    • There was not enough room for the terminal to pass by the plastic housing. I just removed a little and then routed the black wire under the switch.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

作者

与3其他贡献者

Scot Henderson

于05/18/15注册

857 声望

创作了2篇指南

徽章: 9

+ 6更多徽章

3条评论

This works great. Thank you.

JFGuerrero - 回复

Scot,

Thanks so much for your excellent information!!! The exact same part broke on mine today. I looked at your outstanding detail on what to do. I looked through my stash of stuff and found a toggle switch just like the one you showed but from a different manufacturer. I just got done putting it in as you described and it is better than new now. Works like a champ!

Thanks so much,

John Brodrecht

Casper, WY

John Brodrecht - 回复

This was an excellent post with the perfect amount of detail and clear pictures!

I only wish you had the wiring part in the same detail because I think my wiring is faulty. I will look for your posts again for guidance. Thanks

Julie - 回复

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 16

过去 30 天： 39

总计 3,380