简介

In the Black and Decker CHV1510, the battery is often the first component to fail. This guide will show you how to replace the battery in your vacuum.

配件

无需配件。

  1. Press the buttons with unlock symbols on both sides of the nozzle.
    • Press the buttons with unlock symbols on both sides of the nozzle.

    • Pull the nozzle upward.

    • The other button cannot be seen on the image.

  2. Press the button with the "filter" indicator.
    • Press the button with the "filter" indicator.

    • Pull the filter cover upward.

    • Holding the vacuum base firmly, remove all six exterior 20 mm Phillips #0 screws.

    • Carefully and gently pull the two halves of the vacuum apart.

    • Gently pull the battery pack out of the vacuum frame.

    • Holding the battery pack firmly, disconnect the red and black wires from the battery pack by pulling them gently.

结论

To reassemble your device, follow these instructions in reverse order.

Miguel Vilao

于2017年11月09日注册

310 信誉积分

创作了3篇指南

团队

IUPUI, Team S7-G6, Baechle Fall 2017 IUPUI, Team S7-G6, Baechle Fall 2017 的会员

IUPUI-BAECHLE-F17S7G6

3 名成员

创作了3篇指南

浏览统计数据:

过去的24小时: 2

过去的7天: 7

过去的30天: 47

总计 587