修复你的物品 社区 商店

Black and Decker DustBuster 15.6V Nozzle Brush Replacement

简介

The nozzle brush located on the end of shaft may break off during the cleaning process. Replacing the brush is as easy as breaking it off.

你所需要的

  1. Black and Decker DustBuster 15.6V Nozzle Brush Replacement, Nozzle Brush: 步骤 1 中的图像 1，1

    • Lift Nozzle Brush until it clicks into fully erect position.

    编辑

  2. Black and Decker DustBuster 15.6V Nozzle Brush Replacement: 步骤 2 中的图像 1，1

    • Apply a gentle, equal pressure outward, to the inside of both brush legs.

    编辑

  4. Black and Decker DustBuster 15.6V Nozzle Brush Replacement: 步骤 3 中的图像 1，1

    • Remove one of the leg prongs from the hole it is inserted into.

    编辑

  5. Black and Decker DustBuster 15.6V Nozzle Brush Replacement: 步骤 4 中的图像 1，1

    • Rotate the free leg forwards or backwards from the hole.

    • This relieves the pressure from the inside of the legs allowing you to freely remove the last leg from its hole.

    编辑

  6. Black and Decker DustBuster 15.6V Nozzle Brush Replacement: 步骤 5 中的图像 1，1

    • Check each leg hole for debris and clear whats needed.

    • Insert a leg of the new brush into the correct hole, so the brush will click into its erect position.

    • Slide the other leg into its respective hole.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Jacob

于03/15/17注册

101 声望

撰写一个指南

徽章: 2

团队

UMass Dartmouth, Team S6-G1, Isaacson Spring 2017 UMass Dartmouth, Team S6-G1, Isaacson Spring 2017 的会员

UMASSD-ISAACSON-S17S6G1

4 名成员

创作了9篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 3

过去 30 天： 12

总计 325