Black and Decker CM0700BZ Water Tank Replacement

简介

The water tank may become damaged overtime, or need to be removed for a thorough cleaning. This guide will show the steps of removing the water tank fully from the coffee machine.

你所需要的

步骤 1 Lid

Black and Decker CM0700BZ Water Tank Replacement, Lid: 步骤 1 中的图像 1，2

Black and Decker CM0700BZ Water Tank Replacement, Lid: 步骤 1 中的图像 2，2

Open the lid of the coffee maker.
Remove the brew cup.

编辑

步骤 2

Black and Decker CM0700BZ Water Tank Replacement: 步骤 2 中的图像 3，3

Place your finger, screwdriver, or spudger behind the corner of the tab.
Pull up on the tab until it disconnects from the coffee maker.

编辑

步骤 3

Black and Decker CM0700BZ Water Tank Replacement: 步骤 3 中的图像 3，3

Hold the tab while pushing back on the lid.
The lid should open fully with the top of the lid facing down.

编辑

步骤 4

Insert the flathead screwdriver or spudger into one of the inserts holding the lid.
Pry facing away from the lid to force the peg out.
You should hear a pop when it disconnects.
Hold the lid and pull it away from the other insert.

编辑

步骤 5

To also remove the shower head, use the Shower Head guide.

编辑

步骤 6 Water Tank

Black and Decker CM0700BZ Water Tank Replacement, Water Tank: 步骤 6 中的图像 1，2

Black and Decker CM0700BZ Water Tank Replacement, Water Tank: 步骤 6 中的图像 2，2

Remove the carafe holder from the bottom of the coffee machine.

编辑

步骤 7

Black and Decker CM0700BZ Water Tank Replacement: 步骤 7 中的图像 3，3

Place coffee maker on its side, with the bottom facing you.
Remove two 10mm Phillips #1 screws and one 10mm Tri-Point Y1 screws with their designated tips.

编辑