修复你的物品 社区 商店

Black and Decker BL3000S button panel replacement

简介

You will need to have completed the prerequisite guides prior to this guide in order to execute it.

你所需要的

  1. Black and Decker BL3000S button panel replacement, Blender Base: 步骤 1 中的图像 1，2 Black and Decker BL3000S button panel replacement, Blender Base: 步骤 1 中的图像 2，2

    • Before disassembling the blender base, make sure the blender disconnected from any power outlet.

    • Lift the jar straight up from the base without tilting the jar.

    编辑

  2. Black and Decker BL3000S button panel replacement: 步骤 2 中的图像 1，1

    • Remove the top three 1/4 inch base screws using a Philip's head screwdriver.

    编辑

  3. Black and Decker BL3000S button panel replacement: 步骤 3 中的图像 1，2 Black and Decker BL3000S button panel replacement: 步骤 3 中的图像 2，2

    • Remove the two base leg covers next to the power cord using pliers or a flat-head screwdriver.

    • This provides access to the base screws beneath.

    编辑

  4. Black and Decker BL3000S button panel replacement: 步骤 4 中的图像 1，1

    • Remove the following screws that secure the top and bottom halves of the base.

    • One 1/4 Phillips screw

    • One TA-20 screw

    • Both screwdrivers must have a minimum of a three inch shank (length).

    • Screwdrivers with extenders will not fit down the access holes.

    编辑

  6. Black and Decker BL3000S button panel replacement: 步骤 5 中的图像 1，1

    • Lift the top half of the base from the bottom half of the base to reveal the internal mechanism.

    编辑

  7. Black and Decker BL3000S button panel replacement, Circuit Board: 步骤 6 中的图像 1，1

    • Once you have the base removed, the circuit board should be clearly visible inside.

    编辑

  8. Black and Decker BL3000S button panel replacement: 步骤 7 中的图像 1，2 Black and Decker BL3000S button panel replacement: 步骤 7 中的图像 2，2

    • Remove the four screws located on the circuit board.

    • Two are on the left side.

    • Two are on the right side.

    编辑

  9. Black and Decker BL3000S button panel replacement: 步骤 8 中的图像 1，1

    • Remove the following soldered connections with a soldering iron:

    • Motor wires

    • Power cord wires

    编辑

  10. Black and Decker BL3000S button panel replacement: 步骤 9 中的图像 1，1

    • Lift the circuit board straight up to remove it from the base.

    编辑

  11. Black and Decker BL3000S button panel replacement, Buttons: 步骤 10 中的图像 1，1

    • Once the circuit board has been freed from its screws it can be moved out of the way to gain access to the buttons.

    • A single screw must be removed from the top as shown.

    编辑

  12. Black and Decker BL3000S button panel replacement: 步骤 11 中的图像 1，1

    • Push firmly from the outside of the blender on the face of the buttons to pop it out of its locked position.

    编辑

  13. Black and Decker BL3000S button panel replacement: 步骤 12 中的图像 1，2 Black and Decker BL3000S button panel replacement: 步骤 12 中的图像 2，2

    • Provided is a front and a back view of a functioning button frame from the BL3000S.

    • Check for cracks, bends, debris, or missing extentions and fastens.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Austin Abernathy

于10/05/12注册

18 声望

撰写一个指南

徽章: 3

团队

Cal Poly, Team 6-34, Regan Fall 2012 Cal Poly, Team 6-34, Regan Fall 2012 的会员

CPSU-REGAN-F12S6G34

4 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 6

过去 30 天： 21

总计 2,381