Black and Decker BL3000S Blender Blades Replacement

简介

This installation guide will help you separate the blades from the blender jar. Once separated, you can successfully install replacements blades or to check for any malfunctions with the blades.

步骤 1 Blender Blades

Black and Decker BL3000S Blender Blades Replacement, Blender Blades: 步骤 1 中的图像 1，1

Make sure the blender is turned off and unplugged from all power.
Remove the glass jar from the base of the blender.

编辑

步骤 2

Remove the top lid from the blender jar.

编辑

步骤 3

Twist the plastic base of the jar counterclockwise to remove it from the glass upper half.
Take care not to cut yourself on the blades.

编辑

步骤 4

Lift the rubber washer straight up to remove it from the blade assembly.
Take care not to cut yourself on the blades.

编辑

步骤 5

Lift the blades from the bottom cap.

编辑

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

作者

与4其他贡献者

Andrew

于10/04/12注册

209 声望

创作了4篇指南

徽章: 10

+ 7更多徽章

团队

Cal Poly, Team 6-34, Regan Fall 2012 Cal Poly, Team 6-34, Regan Fall 2012 的会员

CPSU-REGAN-F12S6G34

4 名成员

创作了6篇指南

Black and Decker BL3000S Blender Blades Replacement

简介

步骤 1 Blender Blades

添加评论

步骤 2

添加评论

步骤 3

添加评论

步骤 4

添加评论

步骤 5

添加评论

作者

Andrew

团队

Cal Poly, Team 6-34, Regan Fall 2012 Cal Poly, Team 6-34, Regan Fall 2012 的会员

0条评论

添加评论

嵌入本指南

预览