修复你的物品 社区 商店

Black and Decker BDERO100 Power Button Replacement

简介

This guide describes how to replace the power button from the BLACK and DECKER BDERO100 5 inch sander. The tools that you will need for this process are the TR20 Torx Security bit driver or equivalent, the nylon spudger & the plastic opening tool

你所需要的

  1. Black and Decker BDERO100 Power Button Replacement, Chassis: 步骤 1 中的图像 1，2 Black and Decker BDERO100 Power Button Replacement, Chassis: 步骤 1 中的图像 2，2

    • Use the nylon spudger to remove the rubber ring from the filter attachment section.

    • The easiest way to do this is to place the spudger sideways and pulling out the ring.

    翻译

  2. Black and Decker BDERO100 Power Button Replacement: 步骤 2 中的图像 1，2 Black and Decker BDERO100 Power Button Replacement: 步骤 2 中的图像 2，2

    • Use the TR20 Torx Security bit driver to unscrew the five 18.75mm Phillips screws from the warning label side of the chassis.

    翻译

  3. Black and Decker BDERO100 Power Button Replacement: 步骤 3 中的图像 1，2 Black and Decker BDERO100 Power Button Replacement: 步骤 3 中的图像 2，2

    • Grab the plastic opening tool and place it on the separation line between both sides of the chassis.

    • Separate both sides and open the device.

    • Be careful not to lose or detach any internal parts while opening the sander.

    翻译

  5. Black and Decker BDERO100 Power Button Replacement: 步骤 4 中的图像 1，2 Black and Decker BDERO100 Power Button Replacement: 步骤 4 中的图像 2，2

    • Hold the chassis and separate it from the device.

    翻译

  6. Black and Decker BDERO100 Power Button Replacement, Power Button: 步骤 5 中的图像 1，2 Black and Decker BDERO100 Power Button Replacement, Power Button: 步骤 5 中的图像 2，2

    • Hold the power button and pull it out of the chassis.

    翻译

  7. Black and Decker BDERO100 Power Button Replacement: 步骤 6 中的图像 1，2 Black and Decker BDERO100 Power Button Replacement: 步骤 6 中的图像 2，2

    • Select the cable that connects to the power button.

    翻译

  8. Black and Decker BDERO100 Power Button Replacement: 步骤 7 中的图像 1，1

    • Expose the cable and lock system by peeling off the electric cover.

    • When attaching the new power cord you will need to make sure to cover this lock system with electrical tape.

    翻译

  9. Black and Decker BDERO100 Power Button Replacement: 步骤 8 中的图像 1，2 Black and Decker BDERO100 Power Button Replacement: 步骤 8 中的图像 2，2

    • Push the security pin with the plastic spudger and simultaneously, pull gently on the cable to separate it from the button

    翻译

  10. Black and Decker BDERO100 Power Button Replacement: 步骤 9 中的图像 1，2 Black and Decker BDERO100 Power Button Replacement: 步骤 9 中的图像 2，2

    • Detach the black wire connected to the power button from the motor. To do this, gently pull the cable while holding the power button.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与2其他贡献者

Irene Zubillaga

于02/10/16注册

617 声望

创作了5篇指南

徽章: 13

+ 10更多徽章

团队

USF Tampa, Team 1-5, Sullivan Spring 2016 USF Tampa, Team 1-5, Sullivan Spring 2016 的会员

USFT-SULLIVAN-S16S1G5

4 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 12

总计 1,052