Bissell PowerSwift Compact Vacuum 18082 Filter Replacement

简介

This replacement guide details how to clean or replace a filter for a Bissell PowerSwift Lightweight Compact Vacuum model 18082.

Vacuum filters keep dust and dirt from entering back into the air while vacuuming. A dirty filter does not allow for maximum air flow and suction. When your vacuum has trouble suctioning dust and dirt, this can be a sign to replace the filter instead of the entire vacuum.

你所需要的

步骤 1 Filter

Bissell PowerSwift Compact Vacuum 18082 Filter Replacement, Filter: 步骤 1 中的图像 1，2

Bissell PowerSwift Compact Vacuum 18082 Filter Replacement, Filter: 步骤 1 中的图像 2，2

Press the tank release button while pulling the tank away from the vacuum.

编辑

步骤 2

To detach the top of the tank where the filter is located, twist the top of the tank counterclockwise, moving the arrow from the lock symbol to the unlock symbol.

编辑

步骤 3

Separate the top of the tank from the bottom and remove the filter from the top of the tank.
It will help if you pull off big pieces of dust before moving to step 4.

编辑

步骤 4

Bissell PowerSwift Compact Vacuum 18082 Filter Replacement: 步骤 4 中的图像 3，3

Option 1: If you are using a newly purchased filter, skip this step and move to step 5.
Option 2: Clean the existing filter by placing it in a sink or bowl with 1/2 a teaspoon of dish soap and just enough warm water to cover the top of the filter.
Soak the filter for 5 minutes.
Thoroughly rinse and squeeze the filter several times to remove excess soap and water.
Let the filter dry thoroughly for 24 hours before putting it back into the tank.