修复你的物品 社区 商店

Bissell OptiClean Cyclonic Vacuum Filter Replacements

简介

This guide covers how to take out all the filters on the vacuum to either clean or replace them. All steps are accompanied by photos to help you through the process.

你所需要的

  1. Bissell OptiClean Cyclonic Vacuum Filter Replacements, Flex Hose with Handle: 步骤 1 中的图像 1，2 Bissell OptiClean Cyclonic Vacuum Filter Replacements, Flex Hose with Handle: 步骤 1 中的图像 2，2

    • Grab hold of both the flex hose handle and the extension wand.

    • Pull straight out to detach the handle from the extension wand.

    编辑

  2. Bissell OptiClean Cyclonic Vacuum Filter Replacements: 步骤 2 中的图像 1，1

    • Locate the lock clip on the other end of the flex hose.

    编辑

  3. Bissell OptiClean Cyclonic Vacuum Filter Replacements: 步骤 3 中的图像 1，2 Bissell OptiClean Cyclonic Vacuum Filter Replacements: 步骤 3 中的图像 2，2

    • Hold down the lock clip to unlock the flex hose from the vacuum.

    • Remove the flex hose from the vacuum.

    编辑

  5. Bissell OptiClean Cyclonic Vacuum Filter Replacements, Filters: 步骤 4 中的图像 1，3 Bissell OptiClean Cyclonic Vacuum Filter Replacements, Filters: 步骤 4 中的图像 2，3 Bissell OptiClean Cyclonic Vacuum Filter Replacements, Filters: 步骤 4 中的图像 3，3

    • After removing hose, place vacuum on back and unclip the top compartment.

    • Open the compartment.

    • Pull the dirt collection box out of the vacuum.

    编辑

  6. Bissell OptiClean Cyclonic Vacuum Filter Replacements: 步骤 5 中的图像 1，3 Bissell OptiClean Cyclonic Vacuum Filter Replacements: 步骤 5 中的图像 2，3 Bissell OptiClean Cyclonic Vacuum Filter Replacements: 步骤 5 中的图像 3，3

    • Place dirt collection box to the side.

    • Locate the Pre-Motor Filter.

    • Pull the filter out by grabbing the pull tab on top.

    编辑

  7. Bissell OptiClean Cyclonic Vacuum Filter Replacements: 步骤 6 中的图像 1，3 Bissell OptiClean Cyclonic Vacuum Filter Replacements: 步骤 6 中的图像 2，3 Bissell OptiClean Cyclonic Vacuum Filter Replacements: 步骤 6 中的图像 3，3

    • Turn vacuum around and locate the filter cover on the bottom.

    • Place fingers in the opening and pull off the filter cover.

    • Place fingers on each tab on the Post-Motor HEPA Media Filter and pull out.

    编辑

  8. Bissell OptiClean Cyclonic Vacuum Filter Replacements: 步骤 7 中的图像 1，3 Bissell OptiClean Cyclonic Vacuum Filter Replacements: 步骤 7 中的图像 2，3 Bissell OptiClean Cyclonic Vacuum Filter Replacements: 步骤 7 中的图像 3，3

    • Take filter out to clean or replace.

    • To clean Dirt Collection Box, unlatch lid and take off.

    编辑

  9. Bissell OptiClean Cyclonic Vacuum Filter Replacements: 步骤 8 中的图像 1，3 Bissell OptiClean Cyclonic Vacuum Filter Replacements: 步骤 8 中的图像 2，3 Bissell OptiClean Cyclonic Vacuum Filter Replacements: 步骤 8 中的图像 3，3

    • Flip Dirt Collection Box over and locate the push tab.

    • Push the Dirt Cup HEPA Media Filter up to take it off.

    • Picture 3 Shows all the filters taken out of the vacuum.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与2其他贡献者

Austin Marshall

于01/18/18注册

130 声望

撰写一个指南

徽章: 5

+ 2更多徽章

团队

Cal Poly, Team S12-G1, Banghart Winter 2018 Cal Poly, Team S12-G1, Banghart Winter 2018 的会员

CPSU-BANGHART-W18S12G1

5 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 3

过去 30 天： 13

总计 727