Bissell Air180 Fan Replacement

简介

The fan on the Bissell Air180 is a vital component in air purification. With propellers constantly in motion, it can be easy for something to get stuck or cause this component to malfunction.

你所需要的

步骤 1 Air Filter

Bissell Air180 Fan Replacement, Air Filter: 步骤 1 中的图像 1，2

Bissell Air180 Fan Replacement, Air Filter: 步骤 1 中的图像 2，2

Squeeze the clip on the back panel of the bottom housing and pull the panel away from the housing, exposing the air filter.

编辑

步骤 2

Grab the sides of the filter and pull it up.

编辑

步骤 3

Pull the filter away from the bottom housing, removing it from the rest of the device.

编辑

步骤 4 Power Supply

Bissell Air180 Fan Replacement, Power Supply: 步骤 4 中的图像 1，1

Remove the four 18mm Phillips #1 screws connecting the bottom housing to the rest of the device.

编辑

步骤 5

Bissell Air180 Fan Replacement: 步骤 5 中的图像 3，3

Pull the bottom housing away from the rest of the device separating the power supply.
Unplug the red cord to fully disconnect the power supply from the fan and motherboard housing.

编辑

步骤 6 Control Buttons

Bissell Air180 Fan Replacement, Control Buttons: 步骤 6 中的图像 1，3

Bissell Air180 Fan Replacement, Control Buttons: 步骤 6 中的图像 2，3

Bissell Air180 Fan Replacement, Control Buttons: 步骤 6 中的图像 3，3

Pry off the top vent, separating it from the fan and motherboard housing.

编辑

步骤 7

Pry the button control panel up and away from the rest of the device using a spudger.

编辑

步骤 8

Pull the wire connecting the button controls to the fan housing to fully disconnect the button controls from the device.

编辑

步骤 9 Fan

Bissell Air180 Fan Replacement, Fan: 步骤 9 中的图像 1，3

Bissell Air180 Fan Replacement, Fan: 步骤 9 中的图像 2，3

Bissell Air180 Fan Replacement, Fan: 步骤 9 中的图像 3，3

Flip the motherboard and fan housing upside down to find where to disconnect the fan from the rest of the device.
Remove the two 11 mm screws using a Phillips #1 screwdriver.
Detach the two wires connecting the fan to the motherboard so the fan is now loose inside the housing.