跳转到主内容

修复你的物品

维修的权力

商店

简介

Bionaire BAP 600 Transformer Replacement

配件

没有特定配件。

  1. Unplug 7 pin connector
    • Unplug 7 pin connector

  2. Unplug 2 pin wires which connects the front LED's.
    • Unplug 2 pin wires which connects the front LED's.

  3. Remove  two screws Remove  two screws
    • Remove two screws

  4. 打开所有标签

    Mac的RAM升级套装

    购买套装

    所有选项卡都有足够的 RAM

    购买套装
  5. Unplug pins
    • Unplug pins

    • Use scissors to cut zip ties

  6. Unplug rest of pin connections Remove  Neutral and Hot wires They are the two black wires
    • Unplug rest of pin connections

    • Remove Neutral and Hot wires

    • They are the two black wires

    • Pull them out

  7. Unscrew two screws Inspect capacitor for any bulges ( if it has a bulge , it means it is need to be replaced) Check for burnt solder in the back of circuit board
    • Unscrew two screws

    • Inspect capacitor for any bulges ( if it has a bulge , it means it is need to be replaced)

    • Check for burnt solder in the back of circuit board

  8. Use screwdriver to remove screws Use screwdriver to remove screws
    • Use screwdriver to remove screws

结论

To reassemble your device, follow these instructions in reverse order.

Alexander Tarancon

于2016年10月12日注册

1 信誉积分

创作了2篇指南

团队

IUPUI, Team 4-4, Baechle Fall 2016 IUPUI, Team 4-4, Baechle Fall 2016 的会员

IUPUI-BAECHLE-F16S4G4

5 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 109