修复你的物品 社区 商店

Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement

简介

Follow these instructions to replace a damaged throttle control. Optionally, you may also replace the attached throttle control cable.

你所需要的

  1. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement, Throttle Cable: 步骤 1 中的图像 1，3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement, Throttle Cable: 步骤 1 中的图像 2，3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement, Throttle Cable: 步骤 1 中的图像 3，3

    • Cut and remove any zip ties securing the throttle cable.

    编辑

  2. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: 步骤 2 中的图像 1，2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: 步骤 2 中的图像 2，2

    • Use a Phillips #2 driver to remove the screw securing the lower end of the throttle cable.

    编辑

  3. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: 步骤 3 中的图像 1，2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: 步骤 3 中的图像 2，2

    • Remove the bracket securing the lower end of the throttle cable.

    编辑

  4. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: 步骤 4 中的图像 1，3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: 步骤 4 中的图像 2，3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: 步骤 4 中的图像 3，3

    • Rotate the lower end of the throttle cable to detach it from the throttle.

    编辑

  6. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: 步骤 5 中的图像 1，3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: 步骤 5 中的图像 2，3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: 步骤 5 中的图像 3，3

    • When reinstalling the throttle control cable, check to make sure that the throttle control moves the throttle through its full range of motion.

    • If necessary, loosen the screw securing the lower end of the throttle cable and adjust the position of the cable. Re-tighten the screw and check to make sure that the throttle moves through its full range of motion.

    编辑

  7. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: 步骤 6 中的图像 1，2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: 步骤 6 中的图像 2，2

    • Use a 7/16" wrench or deep socket to remove the cap from the throttle control.

    编辑

  8. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: 步骤 7 中的图像 1，2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: 步骤 7 中的图像 2，2

    • Advance the throttle control to expose the gear rack containing the upper end of the throttle cable.

    编辑

  9. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: 步骤 8 中的图像 1，3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: 步骤 8 中的图像 2，3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: 步骤 8 中的图像 3，3

    • Separate the gear rack from the upper end of the throttle cable.

    • Lift and remove the gear rack from the throttle control.

    • If the gear rack doesn't fully detach, advance the throttle control lever a little farther.

    • Lubricate the gear rack with a bit of lithium grease during reassembly.

    编辑

  10. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: 步骤 9 中的图像 1，3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: 步骤 9 中的图像 2，3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: 步骤 9 中的图像 3，3

    • Use a 1/2" wrench to unscrew the upper end of the throttle cable from the throttle control.

    • Slide the throttle cable down out of the bottom of the throttle control, and remove the cable.

    编辑

  11. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement, Throttle Control: 步骤 10 中的图像 1，2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement, Throttle Control: 步骤 10 中的图像 2，2

    • Use a Phillips #2 driver to remove the two screws securing the throttle control.

    • While removing the screws, use a 3/8" wrench to counter-hold the lock nuts and prevent them from rotating.

    编辑

  12. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: 步骤 11 中的图像 1，2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: 步骤 11 中的图像 2，2

    • Remove the throttle control.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

作者

Jeff Suovanen

于08/06/13注册

428,539 声望

创作了259篇指南

徽章: 48

+ 45更多徽章

团队

iFixit iFixit 的会员

Staff

135 名成员

创作了17,199篇指南

一条评论

the part # is incorrect, it appears that it is 440014 not 440013

JACOB - 回复

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 6

过去 30 天： 16

总计 992