修复你的物品 社区 商店

Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement

简介

Follow these instructions to remove the throttle cable, either to replace it or to service the throttle control.

你所需要的

  1. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement, Throttle Cable: 步骤 1 中的图像 1，3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement, Throttle Cable: 步骤 1 中的图像 2，3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement, Throttle Cable: 步骤 1 中的图像 3，3

    • Cut and remove any zip ties securing the throttle cable.

    编辑

  2. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: 步骤 2 中的图像 1，2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: 步骤 2 中的图像 2，2

    • Use a Phillips #2 driver to remove the screw securing the lower end of the throttle cable.

    编辑

  3. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: 步骤 3 中的图像 1，2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: 步骤 3 中的图像 2，2

    • Remove the bracket securing the lower end of the throttle cable.

    编辑

  5. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: 步骤 4 中的图像 1，3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: 步骤 4 中的图像 2，3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: 步骤 4 中的图像 3，3

    • Rotate the lower end of the throttle cable to detach it from the throttle.

    编辑

  6. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: 步骤 5 中的图像 1，3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: 步骤 5 中的图像 2，3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: 步骤 5 中的图像 3，3

    • When reinstalling the throttle control cable, check to make sure that the throttle control moves the throttle through its full range of motion.

    • If necessary, loosen the screw securing the lower end of the throttle cable and adjust the position of the cable. Re-tighten the screw and check to make sure that the throttle moves through its full range of motion.

    编辑

  7. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: 步骤 6 中的图像 1，2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: 步骤 6 中的图像 2，2

    • Use a 7/16" wrench or deep socket to remove the cap from the throttle control.

    编辑

  8. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: 步骤 7 中的图像 1，2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: 步骤 7 中的图像 2，2

    • Advance the throttle control to expose the gear rack containing the upper end of the throttle cable.

    编辑

  9. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: 步骤 8 中的图像 1，3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: 步骤 8 中的图像 2，3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: 步骤 8 中的图像 3，3

    • Separate the gear rack from the upper end of the throttle cable.

    • Lift and remove the gear rack from the throttle control.

    • If the gear rack doesn't fully detach, advance the throttle control lever a little farther.

    • Lubricate the gear rack with a bit of lithium grease during reassembly.

    编辑

  10. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: 步骤 9 中的图像 1，3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: 步骤 9 中的图像 2，3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: 步骤 9 中的图像 3，3

    • Use a 1/2" wrench to unscrew the upper end of the throttle cable from the throttle control.

    • Slide the throttle cable down out of the bottom of the throttle control, and remove the cable.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

Jeff Suovanen

于08/06/13注册

428,539 声望

创作了259篇指南

徽章: 48

+ 45更多徽章

团队

iFixit iFixit 的会员

Staff

135 名成员

创作了17,199篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 10

过去 30 天： 26

总计 1,885