修复你的物品 社区 商店

Billy Goat Brush Cutter BC2600HHF 2015 Rear Guard Replacement

简介

Instructions for removing the rear guard/cover to access internal components for service.

你所需要的

  1. Billy Goat Brush Cutter BC2600HHF 2015 Rear Guard Replacement, Spark Plug Disconnection: 步骤 1 中的图像 1，2 Billy Goat Brush Cutter BC2600HHF 2015 Rear Guard Replacement, Spark Plug Disconnection: 步骤 1 中的图像 2，2

    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

    编辑

  2. Billy Goat Brush Cutter BC2600HHF 2015 Rear Guard Replacement, Rear Guard: 步骤 2 中的图像 1，1

    • Use a 1/2" socket or wrench to remove the two 26 mm bolts securing the rear guard to the back end of the brush cutter.

    编辑

  4. Billy Goat Brush Cutter BC2600HHF 2015 Rear Guard Replacement: 步骤 3 中的图像 1，2 Billy Goat Brush Cutter BC2600HHF 2015 Rear Guard Replacement: 步骤 3 中的图像 2，2

    • The brush cutter is heavy—get help before attempting to lift it.

    • If you choose to tip the brush cutter onto its side, first drain the oil and gas.

    • Raise and support the back end of the brush cutter—or tip it carefully onto its side—in order to access the bottom cover.

    编辑

  5. Billy Goat Brush Cutter BC2600HHF 2015 Rear Guard Replacement: 步骤 4 中的图像 1，3 Billy Goat Brush Cutter BC2600HHF 2015 Rear Guard Replacement: 步骤 4 中的图像 2，3 Billy Goat Brush Cutter BC2600HHF 2015 Rear Guard Replacement: 步骤 4 中的图像 3，3

    • Use a 3/8” socket or wrench to remove the four 21 mm bolts securing the rear guard.

    • Remove the guard.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

Jeff Suovanen

于08/06/13注册

428,539 声望

创作了259篇指南

徽章: 48

+ 45更多徽章

团队

iFixit iFixit 的会员

Staff

135 名成员

创作了17,199篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 4

过去 30 天： 7

总计 513