简介

This guide will show you how to remove the gear in the magneto. A broken gear can cause the magneto not to rotate and therefore, you cannot get the correct timing.

配件

无需配件。

Use a #2 Flathead screw driver to remove the five screws on the body of the magneto
  • Use a #2 Flathead screw driver to remove the five screws on the body of the magneto

添加评论

Locate the spark plug lead.
  • Locate the spark plug lead.

  • Use a Milbar snap ring plier to remove the snap ring.

  • The snap ring can be difficult to remove. Make sure the pliers needles go into the holes of the snap ring.

  • Wear safety goggles when removing the snap ring. The snap ring can shoot out on accident.

添加评论

  • Remove the gear to replace it.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

Kelsi English

于2012年09月26日注册

381 信誉积分

创作了5篇指南

团队

Cal Poly, Team 1-2, Propen Fall 2012 Cal Poly, Team 1-2, Propen Fall 2012 的会员

CPSU-PROPEN-F12S1G2

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 19

总计 1,977