简介

This guide will show you the steps necessary to remove the capacitor in the Bendix Magneto. A worn out capacitor can cause an excessive RPM drop on the left or right aircraft magneto.

配件

无需配件。

  1. Use a #2 Flathead screw driver to remove the five screws on the body of the magneto.
    • Use a #2 Flathead screw driver to remove the five screws on the body of the magneto.

  2. Locate the two screws on the back of the magneto that holds the capacitor in place.
    • Locate the two screws on the back of the magneto that holds the capacitor in place.

  3. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修,即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

  4. Use a #2 Flathead screw driver to remove the screws.
    • Use a #2 Flathead screw driver to remove the screws.

  5. Remove the Capacitor and replace it.
    • Remove the Capacitor and replace it.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Kelsi English

于2012年09月26日注册

381 信誉积分

创作了5篇指南

团队

Cal Poly, Team 1-2, Propen Fall 2012 Cal Poly, Team 1-2, Propen Fall 2012 的会员

CPSU-PROPEN-F12S1G2

4 名成员

创作了5篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 12

总计 2,815