跳转到主内容

修复你的物品

维修的权力

商店

简介

If the temperature dial fails, just follow this simple guide to replace it and fix your toaster.

配件

没有特定配件。

  1. Remove five 11.6 mm Phillips #2 screws from the rear of the device.
    • Remove five 11.6 mm Phillips #2 screws from the rear of the device.

  2. Open the front glass door of the toaster oven.
    • Open the front glass door of the toaster oven.

  3. Locate retaining screw on the upper-middle portion of the door frame.
    • Locate retaining screw on the upper-middle portion of the door frame.

  4. Remove one 21.9 mm Phillips #2 retaining screw from upper-middle portion of door frame.
    • Remove one 21.9 mm Phillips #2 retaining screw from upper-middle portion of door frame.

  5. Flip toaster onto back panel with feet facing forward.
    • Flip toaster onto back panel with feet facing forward.

  6. Essential 工具包

    我们最紧凑的套装中最有用的工具。

    现在开始购物

    Essential 工具包

    我们最紧凑的套装中最有用的工具。

    现在开始购物
  7. Use spudger to pry the grey rubber inserts from the black plastic feet.
    • Use spudger to pry the grey rubber inserts from the black plastic feet.

  8. Remove four 13.7mm Phillips #2 screws from black plastic feet to separate the cover from the device.
    • Remove four 13.7mm Phillips #2 screws from black plastic feet to separate the cover from the device.

  9. Lift the black outer cover off of the toaster
    • Lift the black outer cover off of the toaster

  10. Using a plastic spudger, gently pry the black plastic temperature dial away from the face of the toaster.
    • Using a plastic spudger, gently pry the black plastic temperature dial away from the face of the toaster.

  11. Remove two 5.91 mm #2 Phillips screws which secure the inner component to the toaster.
    • Remove two 5.91 mm #2 Phillips screws which secure the inner component to the toaster.

  12. Inside the device, unplug the red wire connecting the black plastic part of the dial to the heating element.
    • Inside the device, unplug the red wire connecting the black plastic part of the dial to the heating element.

  13. Now unplug the other red wire from the black plastic part of the dial.
    • Now unplug the other red wire from the black plastic part of the dial.

  14. Unplug the two white wires from the metal part of the dial.
    • Unplug the two white wires from the metal part of the dial.

  15. Remove the dial from device interior.
    • Remove the dial from device interior.

结论

To reassemble your device, follow these instructions in reverse order.

Pierce Hampton

于2019年01月31日注册

555 信誉积分

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 9

总计 165