跳转到主内容

修复你的物品

维修的权力

商店

简介

Removing the black metal outer shell of the toaster is an important first step in replacing most major toaster components. This easy-to-follow guide makes it easy to remove and replace.

配件

没有特定配件。

  1. Remove five 11.6 mm Phillips #2 screws from the rear of the device.
    • Remove five 11.6 mm Phillips #2 screws from the rear of the device.

  2. Open the front glass door of the toaster oven.
    • Open the front glass door of the toaster oven.

  3. Locate retaining screw on the upper-middle portion of the door frame.
    • Locate retaining screw on the upper-middle portion of the door frame.

  4. Essential 工具包

    我们最紧凑的套装中最有用的工具。

    现在开始购物

    Essential 工具包

    我们最紧凑的套装中最有用的工具。

    现在开始购物
  5. Remove one 21.9 mm Phillips #2 retaining screw from upper-middle portion of door frame.
    • Remove one 21.9 mm Phillips #2 retaining screw from upper-middle portion of door frame.

  6. Flip toaster onto back panel with feet facing forward.
    • Flip toaster onto back panel with feet facing forward.

  7. Use spudger to pry the grey rubber inserts from the black plastic feet.
    • Use spudger to pry the grey rubber inserts from the black plastic feet.

  8. Remove four 13.7mm Phillips #2 screws from black plastic feet to separate the cover from the device.
    • Remove four 13.7mm Phillips #2 screws from black plastic feet to separate the cover from the device.

  9. Lift the black outer cover off of the toaster
    • Lift the black outer cover off of the toaster

结论

To reassemble your device, follow these instructions in reverse order.

Pierce Hampton

于2019年01月31日注册

555 信誉积分

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 2

过去的30天: 4

总计 131