跳转到主内容

修复你的物品

维修的权力

商店

简介

If the heating element fails for any reason, and needs to be replaced, this guide will walk you through the simple steps required to replace the component.

配件

没有特定配件。

  1. Remove five 11.6 mm Phillips #2 screws from the rear of the device.
    • Remove five 11.6 mm Phillips #2 screws from the rear of the device.

  2. Open the front glass door of the toaster oven.
    • Open the front glass door of the toaster oven.

  3. Locate retaining screw on the upper-middle portion of the door frame.
    • Locate retaining screw on the upper-middle portion of the door frame.

  4. Remove one 21.9 mm Phillips #2 retaining screw from upper-middle portion of door frame.
    • Remove one 21.9 mm Phillips #2 retaining screw from upper-middle portion of door frame.

  5. Flip toaster onto back panel with feet facing forward.
    • Flip toaster onto back panel with feet facing forward.

  6. Essential 工具包

    我们最紧凑的套装中最有用的工具。

    现在开始购物

    Essential 工具包

    我们最紧凑的套装中最有用的工具。

    现在开始购物
  7. Use spudger to pry the grey rubber inserts from the black plastic feet.
    • Use spudger to pry the grey rubber inserts from the black plastic feet.

  8. Remove four 13.7mm Phillips #2 screws from black plastic feet to separate the cover from the device.
    • Remove four 13.7mm Phillips #2 screws from black plastic feet to separate the cover from the device.

  9. Lift the black outer cover off of the toaster
    • Lift the black outer cover off of the toaster

  10. Remove the red wire from the heating element.
    • Remove the red wire from the heating element.

  11. Remove white wire from the opposite side of the heating element.
    • Remove white wire from the opposite side of the heating element.

  12. Use a metal spudger to unfold the tabs of metal that hold heating element in place.
    • Use a metal spudger to unfold the tabs of metal that hold heating element in place.

  13. Gently push the heating element from the side with the red wire to remove it from the toaster. Gently push the heating element from the side with the red wire to remove it from the toaster. Gently push the heating element from the side with the red wire to remove it from the toaster.
    • Gently push the heating element from the side with the red wire to remove it from the toaster.

  14. Repeat steps 1-4 for the second heating element.
    • Repeat steps 1-4 for the second heating element.

结论

To reassemble your device, follow these instructions in reverse order.

Pierce Hampton

于2019年01月31日注册

555 信誉积分

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 3

过去的30天: 23

总计 346