修复你的物品 社区 商店

Bell and Howell DNV16HDZ Hand Strap Replacement

你所需要的

  1. Bell and Howell DNV16HDZ Hand Strap Replacement, Lens Assembly: 步骤 1 中的图像 1，2 Bell and Howell DNV16HDZ Hand Strap Replacement, Lens Assembly: 步骤 1 中的图像 2，2

    • Remove the five 30mm Phillips #0 screws on the bottom of the camera.

    编辑

  2. Bell and Howell DNV16HDZ Hand Strap Replacement: 步骤 2 中的图像 1，1

    • Use a plastic opening tool to disconnect the internal hinges that snaps the camera into place.

    • Using a plastic opening tool is important since a metal one will scratch or damage the thin plastic hinges that hold the camera together.

    编辑

  4. Bell and Howell DNV16HDZ Hand Strap Replacement: 步骤 3 中的图像 1，1

    • It will still be connected by a plastic film. This can also be disconnected by pulling up the white part where it connects to the light circuit board.

    编辑

  5. Bell and Howell DNV16HDZ Hand Strap Replacement, Hand Strap: 步骤 4 中的图像 1，2 Bell and Howell DNV16HDZ Hand Strap Replacement, Hand Strap: 步骤 4 中的图像 2，2

    • Pull the side with the hand strap upwards to disconnect it from the camcorder.

    • Unscrew the four 40 mm Phillips #0 screws.

    • Add the new hand strap now.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Jerry Hadjah

于03/04/16注册

525 声望

创作了5篇指南

徽章: 10

+ 7更多徽章

团队

UMass Dartmouth, Team 8-4, Botvin Spring 2016 UMass Dartmouth, Team 8-4, Botvin Spring 2016 的会员

UMASSD-BOTVIN-S16S8G4

3 名成员

创作了12篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 5

总计 189