跳转到主内容

Belkin NetCam HD Speaker Replacement

你所需要的

  1. Belkin NetCam HD Speaker Replacement, Case: 步骤 1 中的图像 1,1
    • Use a wrench to loosen up the stand from the back in order to hold the NetCam more comfortably.

  2. Belkin NetCam HD Speaker Replacement: 步骤 2 中的图像 1,1
    • Work a plastic opening tool into the seam and pry the face plate away from the back panel.

  3. Belkin NetCam HD Speaker Replacement: 步骤 3 中的图像 1,2 Belkin NetCam HD Speaker Replacement: 步骤 3 中的图像 2,2
    • Use pressure to separate the covers.

    • When pulling the device apart, separate from the bottom up in order to avoid pulling the wiring at the top apart.

  4. Belkin NetCam HD Speaker Replacement, Front Casing: 步骤 4 中的图像 1,1
    • Carefully use your fingers to gently pull out the white attachment from the tan colored part.

  5. Belkin NetCam HD Speaker Replacement, Speaker: 步骤 5 中的图像 1,2 Belkin NetCam HD Speaker Replacement, Speaker: 步骤 5 中的图像 2,2
    • Use a Phillips #0 screwdriver to take out the two 1.2 mm screws on the board.

  6. Belkin NetCam HD Speaker Replacement: 步骤 6 中的图像 1,3 Belkin NetCam HD Speaker Replacement: 步骤 6 中的图像 2,3 Belkin NetCam HD Speaker Replacement: 步骤 6 中的图像 3,3
    • With your fingers, pull the circuit board out of the back casing.

    • When pulling the board up be sure to do so carefully so you do not break the cord which is attached on the back side.

  7. Belkin NetCam HD Speaker Replacement: 步骤 7 中的图像 1,2 Belkin NetCam HD Speaker Replacement: 步骤 7 中的图像 2,2
    • Gently pull the speaker out of the holder from the back of the cover.

  8. Belkin NetCam HD Speaker Replacement: 步骤 8 中的图像 1,1
    • The speaker wires are attached with the board. It can be unattached gently by pulling out the white attachment from the port.

结论

To reassemble your device, follow these instructions in reverse order.

团队

USF Tampa, Team 3-5, Sullivan Fall 2016 USF Tampa, Team 3-5, Sullivan Fall 2016 的会员

USFT-SULLIVAN-F16S3G5

4 名成员

创作了14篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 2

过去 30 天: 3

总计 295