跳转到主内容

Belkin NetCam HD Plus Front Casing Replacement

你所需要的

  1. Belkin NetCam HD Plus Front Casing Replacement, Case: 步骤 1 中的图像 1,1
    • Use a wrench to loosen up the stand from the back in order to hold the NetCam more comfortably.

  2. Belkin NetCam HD Plus Front Casing Replacement: 步骤 2 中的图像 1,1
    • Work a plastic opening tool into the seam and pry the face plate away from the back panel.

  3. Belkin NetCam HD Plus Front Casing Replacement: 步骤 3 中的图像 1,2 Belkin NetCam HD Plus Front Casing Replacement: 步骤 3 中的图像 2,2
    • Use pressure to separate the covers.

    • When pulling the device apart, separate from the bottom up in order to avoid pulling the wiring at the top apart.

  4. Belkin NetCam HD Plus Front Casing Replacement, Microphone: 步骤 4 中的图像 1,2 Belkin NetCam HD Plus Front Casing Replacement, Microphone: 步骤 4 中的图像 2,2
    • Use tweezers to gently pull out the white attachment from the port.

    • Use your fingers to pull out the white attachment from the tan port on the front of the board a little.

  5. Belkin NetCam HD Plus Front Casing Replacement: 步骤 5 中的图像 1,2 Belkin NetCam HD Plus Front Casing Replacement: 步骤 5 中的图像 2,2
    • Use a pair of tweezers to wedge between the mic and the rubber guard to remove the mic from the front cover.

    • If the rubber guard comes off with the mic just remove the guard from mic and place back on the front cover.

  6. Belkin NetCam HD Plus Front Casing Replacement, Front Casing: 步骤 6 中的图像 1,1
    • Carefully use your fingers to gently pull out the white attachment from the tan colored part.

结论

To reassemble your device, follow these instructions in reverse order.

团队

USF Tampa, Team 3-5, Sullivan Fall 2016 USF Tampa, Team 3-5, Sullivan Fall 2016 的会员

USFT-SULLIVAN-F16S3G5

4 名成员

创作了14篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 2

过去 7 天: 3

过去 30 天: 5

总计 284