修复你的物品 社区 商店

Beboncool Gamepad for Nintendo Switch Charging Port Replacement

简介

This guide will help to replace a broken or faulty charging port in the Beboncool Gamepad for Nintendo Switch. If your device does not seem to receive any power despite being plugged in to a known working outlet with a known working cable, the charging port may need to be replaced.

你所需要的

  1. Beboncool Gamepad for Nintendo Switch Charging Port Replacement, Charging Port: 步骤 1 中的图像 1，3 Beboncool Gamepad for Nintendo Switch Charging Port Replacement, Charging Port: 步骤 1 中的图像 2，3 Beboncool Gamepad for Nintendo Switch Charging Port Replacement, Charging Port: 步骤 1 中的图像 3，3

    • Use the plastic opening tool to remove the blue plastic grips from the sides of the controller.

    编辑

  2. Beboncool Gamepad for Nintendo Switch Charging Port Replacement: 步骤 2 中的图像 1，2 Beboncool Gamepad for Nintendo Switch Charging Port Replacement: 步骤 2 中的图像 2，2

    • Use the Phillips #0 screwdriver to remove the seven 5mm screws from the back of the controller.

    编辑

  3. Beboncool Gamepad for Nintendo Switch Charging Port Replacement: 步骤 3 中的图像 1，3 Beboncool Gamepad for Nintendo Switch Charging Port Replacement: 步骤 3 中的图像 2，3 Beboncool Gamepad for Nintendo Switch Charging Port Replacement: 步骤 3 中的图像 3，3

    • Gently separate the two halves of the controller.

    • As the two covers come apart the L1 and R1 button, will fall free from the controller. Be sure not to lose them if they should pop out and fall.

    • Be sure to slide the small circuit boards out of the covers to be able to separate the two halves

    编辑

  5. Beboncool Gamepad for Nintendo Switch Charging Port Replacement: 步骤 4 中的图像 1，2 Beboncool Gamepad for Nintendo Switch Charging Port Replacement: 步骤 4 中的图像 2，2

    • Use the Phillips #0 screwdriver to remove the two 3.5mm screws holding the circuit board in place.

    编辑

  6. Beboncool Gamepad for Nintendo Switch Charging Port Replacement: 步骤 5 中的图像 1，2 Beboncool Gamepad for Nintendo Switch Charging Port Replacement: 步骤 5 中的图像 2，2

    • Lift the motherboard from the back case with the vibration motors and button boards attached.

    编辑

  7. Beboncool Gamepad for Nintendo Switch Charging Port Replacement: 步骤 6 中的图像 1，2 Beboncool Gamepad for Nintendo Switch Charging Port Replacement: 步骤 6 中的图像 2，2

    • Gently pull the battery from the circuit board, leaving it connected to the board with its lead wires.

    编辑

  8. Beboncool Gamepad for Nintendo Switch Charging Port Replacement: 步骤 7 中的图像 1，3 Beboncool Gamepad for Nintendo Switch Charging Port Replacement: 步骤 7 中的图像 2，3 Beboncool Gamepad for Nintendo Switch Charging Port Replacement: 步骤 7 中的图像 3，3

    • Remove the charging port from the edge of the motherboard by desoldering each of its four solder points and lifting the port from the board.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 15

总计 663