修复你的物品 社区 商店

Battery Disconnect Procedure

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

简介

prerequisite battery disconnect

你所需要的

  1. Battery Disconnect Procedure, Back Cover: 步骤 1 中的图像 1，2 Battery Disconnect Procedure, Back Cover: 步骤 1 中的图像 2，2

    • Before you begin, switch off your phone.

    • Remove the SIM card tray.

    翻译

  2. Battery Disconnect Procedure: 步骤 2 中的图像 1，1

    • Remove the two Torx T2 screws (2.5 mm length).

    • The OnePlus 5T doesn't use a lot of adhesive to secure the backcover, however the clamps are very strong and require some force during the opening procedure.

    翻译

  3. Battery Disconnect Procedure: 步骤 3 中的图像 1，3 Battery Disconnect Procedure: 步骤 3 中的图像 2，3 Battery Disconnect Procedure: 步骤 3 中的图像 3，3

    • Insert an opening tool between the display and the backcover at the bottom end of the phone.

    • Use the opening tool to create a gap between back cover and display.

    • Insert an opening pick in the gap you created with the opening tool.

    翻译

  4. Battery Disconnect Procedure: 步骤 4 中的图像 1，3 Battery Disconnect Procedure: 步骤 4 中的图像 2，3 Battery Disconnect Procedure: 步骤 4 中的图像 3，3

    • Slide the opening pick to the bottom right corner of the phone.

    • Insert a second opening pick and slide it to the bottom left corner of the phone.

    翻译

  5. Battery Disconnect Procedure: 步骤 5 中的图像 1，3 Battery Disconnect Procedure: 步骤 5 中的图像 2，3 Battery Disconnect Procedure: 步骤 5 中的图像 3，3

    • Slide the opening pick around the bottom left corner and then up along the left edge of the phone to open the plastic clamps that secure the backcover.

    翻译

  7. Battery Disconnect Procedure: 步骤 6 中的图像 1，3 Battery Disconnect Procedure: 步骤 6 中的图像 2，3 Battery Disconnect Procedure: 步骤 6 中的图像 3，3

    • Slide the opening pick around the bottom right corner and then up along the right edge of the phone to open the plastic clamps that secure the backcover.

    翻译

  8. Battery Disconnect Procedure: 步骤 7 中的图像 1，3 Battery Disconnect Procedure: 步骤 7 中的图像 2，3 Battery Disconnect Procedure: 步骤 7 中的图像 3，3

    • Try not to remove the backcover all the way yet. The fingerprint and the charging port and headphone flex cables are still connected to the motherboard.

    • Flip your phone and carefully lift the bottom end of the backcover away from the phone assembly. Fold it to left and hold it at an 80° angle.

    翻译

  9. Battery Disconnect Procedure: 步骤 8 中的图像 1，2 Battery Disconnect Procedure: 步骤 8 中的图像 2，2

    • Use a spudger to pry up and disconnect the fingerprint flex cable.

    翻译

  10. Battery Disconnect Procedure: 步骤 9 中的图像 1，3 Battery Disconnect Procedure: 步骤 9 中的图像 2，3 Battery Disconnect Procedure: 步骤 9 中的图像 3，3

    • Twist the backcover around 180° and lay it down to align the bottom end of the backcover the top edge of the battery.

    翻译

  11. Battery Disconnect Procedure: 步骤 10 中的图像 1，3 Battery Disconnect Procedure: 步骤 10 中的图像 2，3 Battery Disconnect Procedure: 步骤 10 中的图像 3，3

    • Use a pair of tweezers to remove the small metal shield which covers the battery and the charging port and headphone jack flex cable connectors.

    翻译

  12. Battery Disconnect Procedure: 步骤 11 中的图像 1，2 Battery Disconnect Procedure: 步骤 11 中的图像 2，2

    • Use a spudger to pry up and disconnect the charging port and headphone jack flex cable.

    翻译

  13. Battery Disconnect Procedure: 步骤 12 中的图像 1，2 Battery Disconnect Procedure: 步骤 12 中的图像 2，2

    • Remove the backcover.

    翻译

  14. Battery Disconnect Procedure, Battery Disconnect: 步骤 13 中的图像 1，2 Battery Disconnect Procedure, Battery Disconnect: 步骤 13 中的图像 2，2

    • Use a spudger to pry up and disconnect the battery flex cable.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Dominik Schnabelrauch

于11/23/16注册

202,809 声望

创作了682篇指南

徽章: 40

+ 37更多徽章

团队

iFixit iFixit 的会员

Staff

135 名成员

创作了16,732篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 56