Basis B1 Band Battery Replacement - iFixit 维修指南

简介

The battery can go bad on many devices. This guide includes removing the back plate and then detaching the battery from the rest of the watch.

你所需要的

步骤 1 Watch Strap

Basis B1 Band Battery Replacement, Watch Strap: 步骤 1 中的图像 1，1

Wedge a plastic opening tool between band contacts.

步骤 2

Basis B1 Band Battery Replacement: 步骤 2 中的图像 1，1

Push in plastic opening tool until the components click and pop out of the holder.
Repeat steps for other band.

步骤 3 Back Plate

Basis B1 Band Battery Replacement, Back Plate: 步骤 3 中的图像 1，1

Remove four 4mm screws using a PH000 screwdriver.
Remove back plate.

步骤 4 Battery

Basis B1 Band Battery Replacement, Battery: 步骤 4 中的图像 1，1

Use tweezers to remove elastomeric, or zebra, connector.

步骤 5

Basis B1 Band Battery Replacement: 步骤 5 中的图像 1，2

Basis B1 Band Battery Replacement: 步骤 5 中的图像 2，2

Use the flat end of the spudger to carefully lift the battery until adhesive seal is broken.

步骤 6

Basis B1 Band Battery Replacement: 步骤 6 中的图像 1，1

Use the pointy edge of the spudger tool to detach battery leads from the circuit board.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与2其他贡献者

Kaitlyn Lee

于11/06/17注册

518 声望

创作了4篇指南

+ 4更多徽章

团队

IUPUI, Team S6-G1, Baechle Fall 2017 IUPUI, Team S6-G1, Baechle Fall 2017 的会员

IUPUI-BAECHLE-F17S6G1

4 名成员

创作了4篇指南

0条评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 1

过去 30 天： 1

总计 187