跳转到主内容

Back Panel

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

你所需要的

  1. Back Panel, Back Panel: 步骤 1 中的图像 1,2 Back Panel, Back Panel: 步骤 1 中的图像 2,2
    • Using a Torx T6 Screwdriver, remove the ten 7mm screws from the back panel.

  2. Back Panel: 步骤 2 中的图像 1,3 Back Panel: 步骤 2 中的图像 2,3 Back Panel: 步骤 2 中的图像 3,3
    • Using a metal spudger, pry the device apart.

    • To recombine them, line up the two halves of the device and press them together.

  3. Back Panel: 步骤 3 中的图像 1,1
    • Turn the device over, laying it on its back with the screen facing upwards.

    • Lift the front panel away from the silver part of the back panel.

    • Make sure not to rip the ribbon cable that is connected to the screen and the motherboard.

结论

To reassemble your device, follow these instructions in reverse order.

Ryan Williams

于09/28/16注册

763 声望

创作了6篇指南

团队

USF Tampa, Team 4-2, Passmore Fall 2016 USF Tampa, Team 4-2, Passmore Fall 2016 的会员

USFT-PASSMORE-F16S4G2

4 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 32